This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - fazer69
1
« on: 07 April 2018, 06:24:57 pm »
Cheers unfazed, great reply. I think iam going to remove the alarm so i dont get any problems. I had the bike from new for 10 years, sold it & got it back again 2 years later, so many memories.
2
« on: 30 March 2018, 11:42:27 pm »
All great replys guys, it was just the fob batteries but i think the general opinion is to ditch the alarm before it causes trouble. The alarm fob is the one with the clear cover. cheers guys.
3
« on: 29 March 2018, 06:37:25 pm »
Hi guys, my alarm has been on the fazer for over 12 years now, iam trying to replace the alarm fob batterys, ive had the clear cover off but i dont think thats the right way. Any ideas?????
4
« on: 14 July 2017, 07:36:08 pm »
 Just bought this back after two years apart. it was mine from brand new to 10 years old, now i got it back. 55 reg 22000 miles mint paid 2800
5
« on: 02 April 2015, 06:24:32 pm »
Cheers guys, its just had oil & filter & a good lube the past 4 years so i think a full service is due.
6
« on: 01 April 2015, 07:59:56 pm »
How long should I leave my plugs in ? so far its been 4 years & 9 k miles.
7
« on: 19 March 2015, 08:27:44 pm »
Fitting a Zumo 660, straight off the battery using my optimate lead, plug it in when using, job done.
8
« on: 15 June 2014, 07:59:47 pm »
Ive fitted the mirror extenders, its a peice of hiss, 15 minutes a side, my opinion, they do help abit.
9
« on: 10 November 2013, 08:12:40 am »
Ive got the vstrom ones on mine, you need heated grips aswell, there great for keeping the rain off. Have a look at my post for them fazer69.
10
« on: 16 October 2013, 10:16:46 pm »
Same seat as mine!
11
« on: 10 August 2013, 04:38:56 pm »
New V Strom when it comes out??
12
« on: 19 March 2013, 07:44:23 pm »
Got the screen from the usa when on holiday, it was over a hundred pounds, round scotland the past few years its been fantastic.
13
« on: 18 March 2013, 07:40:33 pm »
Ive got the Rifle 20" tinted screen, its fantastic in the rain, its quite tall & doesnt move in the wind, if you look at my posts/ pictures you should see it on the bike, fazer69.
14
« on: 28 February 2013, 02:07:17 pm »
My winter hack Honda sl 230
15
« on: 11 July 2012, 02:50:29 pm »
Ive done pictures of mine on here somewhere, they need a bit of tirmming where they bolt on & the bar end of the guards need opened up a bit with a drimmel, for a good fit i finnished off with a heat gun, iam not to handy with spanners & it took meb 30 mins a side, if i can find my pics ill repost.
16
« on: 24 May 2012, 06:40:17 pm »
160 knocking about, maybe 200 on a good long run. At morrisons yesterday, my light came on i rode for 5 miles more, took my time filling the tank & put in 17.5 lts, gen 1- 55 reg.
17
« on: 23 May 2012, 09:25:14 am »
Handle bar riser YAMAHA FZS1000 Fazer 30mm Rise BLACK £29.99, there on ebay now.
18
« on: 21 May 2012, 11:36:04 pm »
the 30mm risers, i had no problems with them, its alot more upright & spot on when the tank bags on.
19
« on: 20 May 2012, 02:55:00 pm »
Its a bagster seat, i love it but our lass says the stock seat is better, more comfortable.
20
« on: 20 May 2012, 02:52:34 pm »
Hi guys, ill reply to you all in one go, spares, i take spare brake & clutch lever, a roll of gaffer tape & some cable ties. The bars are standard but with 30mm risers, just easyer with a tank bag on, a riffle 20inch screen & hand guards of a v-strom. Top box is a 55l krauser, this is the second fazer its been on with no problems. I rack the rear suspension spring up 6 clickes, nether botherd with tyre pressures. iam 15 st & our lass is 10st, i think we have under half st in the box & i try to have a bit of weight in the tank bag. The hand guards were fantastic last year, we did j,o,g if your thing of putting them on for a trip do so.
21
« on: 20 May 2012, 12:43:22 pm »
Hi all just took a few photos of my touring set up for this years scotland trip, fortwilliam, ullapool, applecross, plockton & glencoe.
22
« on: 12 May 2012, 06:35:12 pm »
Tidy job
23
« on: 11 May 2012, 01:12:17 pm »
It will be nice to see your pics, good to see how you do it.
24
« on: 07 May 2012, 07:48:48 pm »
hi, i think it was RAM-B-349, I GOT A SPARE NUT, DRILLED IT & PUT A NUT ON THE INSIDE OF THE NUT, TO BE HONEST ITS A BIT LOW DOWN, THE ONE ON THE TOP CLAMP IS BETTER EVEN WITH A TANK BAG ON.
25
« on: 07 May 2012, 03:33:53 pm »
just read the ram mount post, i hope these help
|
Show Posts