Date: 23-04-24  Time: 19:42 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - festerbestertester

Pages: [1]
1
FZS600 Fazer / Re: Starter not working
« on: 10 February 2022, 07:03:07 pm »
All sorted. MOT passed

2
FZS600 Fazer / Re: Ignition light
« on: 02 February 2022, 12:45:09 pm »
Oil and filter changed, problem solved.

3
FZS600 Fazer / Re: Ignition light
« on: 29 January 2022, 02:32:33 pm »
Was planning to do oil and filter
next week.
Will see what happens.

4
FZS600 Fazer / Re: Ignition light
« on: 28 January 2022, 09:29:47 pm »
Just comes on briefly when ignition is switched off
and then goes out. Not on when I press starter.

5
FZS600 Fazer / Re: Ignition light
« on: 28 January 2022, 04:47:46 pm »

Just had a thought.
The oil light comes on when I switch the ignition on but goes out
Before I pressed the starter.

6
FZS600 Fazer / Re: Ignition light
« on: 27 January 2022, 06:11:21 pm »
Oil ok

7
FZS600 Fazer / Re: Ignition light
« on: 26 January 2022, 06:41:03 pm »
Will do thanks

8
FZS600 Fazer / Ignition light
« on: 26 January 2022, 01:07:37 pm »
Start and set off on the bike no problem. After about a mile red light comes on. Parked up for 10 minutes back to normal. This is happened several times this week, and wondering if this is a rectifier problem

9
FZS600 Fazer / Re: Starter not working
« on: 12 January 2022, 01:15:30 pm »
Solved. Intermittent cut-off switch,
 corroded starter switch, and side stand switch.

10
FZS600 Fazer / Re: Starter not working
« on: 09 January 2022, 12:50:00 pm »
New unit ordered. Will try bypass if it stops raining

11
FZS600 Fazer / Re: Starter not working
« on: 09 January 2022, 11:53:43 am »
I have no continuity with the side stand either up or down.
 Is it goosed?

12
FZS600 Fazer / Re: Starter not working
« on: 09 January 2022, 09:34:44 am »
I have checked and got continuity with the switch. Any other ideas appreciated

13
FZS600 Fazer / Re: Starter not working
« on: 08 January 2022, 02:01:26 pm »
Opened the switchgear sprayed with a electrical cleaner put back still nothing.
Supposed to be a better day tomorrow and I can get a meter on the switch

14
FZS600 Fazer / Re: Starter not working
« on: 08 January 2022, 12:23:31 pm »
Bike was in neutral. When I switch the ignition on the neutral light the aisle light charger light oh come on but the charge light and I light go off immediately neutral stays on. Hopefully it will stop raining soon and I can check the switch. Do wish I had a garage!

15
FZS600 Fazer / Re: Starter not working
« on: 07 January 2022, 07:19:45 pm »
Thanks. Just hope it’s dry tomorrow and I will investigate

16
FZS600 Fazer / Re: Starter not working
« on: 07 January 2022, 04:36:57 pm »
Will open up in the morning and test
Weather permitting (snow!)
Thanks

17
FZS600 Fazer / Starter not working
« on: 07 January 2022, 02:29:51 pm »
Came to start the bike this morning and there is no noise from the starter motor or the fuel pump. The battery is fine, fuses okay and lights work. Would appreciate any advice.
2002 fzs600

18
FZS600 Fazer / Re: Help with spring change
« on: 11 April 2021, 08:02:15 pm »
Will have a go next weekend as need bike this week

19
FZS600 Fazer / Re: Help with spring change
« on: 11 April 2021, 06:57:34 pm »
Any suggestions?

20
FZS600 Fazer / Re: Help with spring change
« on: 11 April 2021, 05:32:35 pm »
When I pull the endcap out the slider and spring want to come with that but will not

21
FZS600 Fazer / Help with spring change
« on: 11 April 2021, 05:11:50 pm »
I am struggling to change the fork springs on my FZS 600 02 model. When I unscrew the endcap it does not come away from the slider and consequently cannot be removed. Any advice much appreciated.

22
FZS600 Fazer / Re: Hazard lights come on when ignition switched on.
« on: 10 November 2020, 09:38:43 am »
Short! Fixed.

23
FZS600 Fazer / Re: Hazard lights come on when ignition switched on.
« on: 09 November 2020, 06:56:50 pm »
Dark now. Will check in morning. Thanks

24
FZS600 Fazer / Hazard lights come on when ignition switched on.
« on: 09 November 2020, 03:56:11 pm »
I have just changed the clutch and when I switched my ignition on the hazard lights came on and would not switch off. Any help much appreciated.

Pages: [1]