Date: 18-05-24  Time: 07:38 am

Author Topic: ok....let`s try another angle !  (Read 4948 times)

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: ok....let`s try another angle !
« Reply #25 on: 18 May 2012, 08:01:45 pm »
 :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin  bedtime !!!!!!!!!!!!!!!!!!!!!!

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: ok....let`s try another angle !
« Reply #26 on: 18 May 2012, 08:06:28 pm »
ok!! good luck with it? .....why dont you try pipe strait from tank to carbs??? no fuel pumps in my era!!!!

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: ok....let`s try another angle !
« Reply #27 on: 18 May 2012, 08:17:09 pm »
ok!! good luck with it? .....why dont you try pipe strait from tank to carbs??? no fuel pumps in my era!!!!
tried that matey. bit hit and miss. seemed to get a load of airlocks constantly in the fuel line. yep give me gravity feed anyday ;) . see what tomorrow brings. thanks all. Ade

clayt74

  • Club Racer
  • ****
  • Posts: 396
    • Main bike:
      FZS600 02-03
    • View Profile
Re: ok....let`s try another angle !
« Reply #28 on: 19 May 2012, 12:11:15 pm »
ok, just checked what my fuel pump does;
at idle = 1 pulse every 5 secs (depending on how you timed it it could be considered 2 pulses in 5-6 sec duration)?
at 5K = 6 pulses (counted 3 times, counted 7 pulses twice)


not sure if that's gonna help with the comparisons you are trying to do?


good luck mate

110%

  • CBT Wobbler
  • *
  • Posts: 40
    • Main bike:
      FZS600 98-99
    • View Profile
Re: ok....let`s try another angle !
« Reply #29 on: 19 May 2012, 12:30:45 pm »
At idle mine pumps once every 4.3 seconds taken as an average from 1 minute of counting.
If I held it at 5000rpm for one minute my next door neighbour would most probably come around and stick a kitchen knife up my arse.

I doubt my results would be affected by the fact that my downpipes are riddled with holes again (which does affect the performance of the engine but probably not the fuel filter timings) but thought I would mention it in the interests of fair science.

I'm guessing for a true experiment you would have needed the results a 5000rpm as well so I'm not sure how helpful I've been - although if you lived in London I would be more than willing to lend you my carbs for an afternoon.
#Driven by the irony that only being shackled to the road could ever I be free.#

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: ok....let`s try another angle !
« Reply #30 on: 20 May 2012, 08:31:07 am »
ade, did you have a look at your diaphrams ? spoke to a motorcycle mech i know? and that was the second thing that come to his head!! the first being?....inlet rubbers/ perished/ loose.? clive.

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: ok....let`s try another angle !
« Reply #31 on: 20 May 2012, 09:54:05 pm »
ade, did you have a look at your diaphrams ? spoke to a motorcycle mech i know? and that was the second thing that come to his head!! the first being?....inlet rubbers/ perished/ loose.? clive.
mate its been a right old weekend what with this and that. aint been near the bike at all. but will be re-checking everything again at some point during this week. cheers for asking ;)

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: ok....let`s try another angle !
« Reply #32 on: 20 May 2012, 10:00:35 pm »
ok, if you do find you,v got problem with any of the diaphrams? ive got 1 that you can have if needed? clive.

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: ok....let`s try another angle !
« Reply #33 on: 21 May 2012, 07:17:24 pm »
swoping the ecu and removing the filter made no difference to my bike so i put filter and ecu back on and tryed the pulsing test again,sane results as before.......idle....2.5 pulses...........5000....7 pulses.
have you had chance to spend so time on the fazer ?
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: ok....let`s try another angle !
« Reply #34 on: 22 May 2012, 07:40:34 pm »
any progress ade  ;)
One, is never going to be enough.....

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: ok....let`s try another angle !
« Reply #35 on: 22 May 2012, 08:26:00 pm »
well i`ve been prescribed anusol by the quack and told to stop scratching and to make an appointment in a fortnight.........so fingers crossed eh !! :D :D

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: ok....let`s try another angle !
« Reply #36 on: 23 May 2012, 06:30:18 pm »
ade, did you get chance to look at yours today?

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: ok....let`s try another angle !
« Reply #37 on: 25 May 2012, 11:45:27 am »
look in for sale and wanted ade?...braking a fazer?...you wanted a fuel pump didnt you?