This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - nickodemon
176
« on: 18 March 2012, 09:42:03 pm »
Was bored the other day, so bought a pile of poo - £80
177
« on: 09 March 2012, 04:29:48 pm »
Hi, selling right rear footpeg on fleabay.
Item number: 140720401673
178
« on: 09 March 2012, 04:23:49 pm »
Hi, Selling original bars and bar ends on fleabay for gen 1 fazer.
[/size]Item number: 140718292828 [/size] [/size]Item number: 140718296112
180
« on: 21 February 2012, 08:05:54 pm »
Selling yellow fazer 1000 gen 1 (2001 - 2005) bellypan on fleabay Item number: 140708950657 
181
« on: 19 February 2012, 03:07:55 pm »
I have a full monty fazer and a standard one. The question is - can i shorten the carb spring, so its the same length as the full monty spring to make the throttle snappier on the standard bike? Or can the mod only be done if it has the kit fitted? 
182
« on: 05 February 2012, 01:36:48 pm »
Selling a black hugger for a gen 1 fazer 1000 on fleabay Item number: 140693704444
183
« on: 29 January 2012, 08:19:52 pm »
Hi, Selling speedo converter on fleabay. Item number: 140697809126
184
« on: 19 January 2012, 11:14:52 pm »
Hi, I'm selling bits and bobs i don't need on ebay - might be of use to someone? I have an original toolkit, panniers, rack & exhaust. I will list one item nu mber and you can find the rest by looking at my other items. Cheers [size=78%] item no - [/size] 140681631145 [/size] [/size]
185
« on: 07 January 2012, 12:45:52 pm »
Decided to set up the front forks on my recently acquired gen 1 and found the compression damping adjusters at the bottom of the fork legs seized solid. Anyone have useful tips to free them off. I have given them a good soaking with silkopen, but i think it will require another method, Cheers.
186
« on: 06 January 2012, 10:29:15 am »
Hi, I recently bought an imported gen 1 that has kph clocks fitted. The guy i bought it from said it has a speedo healer fitted. Where abouts are they usually located and how easy are they to remove. I'm thinking of converting it back to mph clocks. Also if anyone knows a shop that can correct the mileage of the clocks i buy, so that the mileage is the same. Cheers.
187
« on: 06 January 2012, 10:22:47 am »
I'm looking for a set of low mileage clocks (20'000) for my imported fazer 1000 It has 34'000 kms on it which roughly equates to 20 -21'000 miles. I would also happily swap. If anyone knows of clocks from a crashed one let me know, or if anyone knows where i can get the clock mileage reset (If they are higher miles) That would be useful too. Cheers
188
« on: 25 December 2011, 12:06:26 am »
TO ALL FOCCERS - MERRY XMAS AND A VERY HAPPY NEW YEAR! 
189
« on: 23 December 2011, 09:49:27 pm »
I bought a gen 1 the other week. I noticed that there was a little white sludge on the filler cap and top of clutch housing. The bike had only done 5 miles in the last year and was hardly used the year before, so i think he had been going into the garage and firing it up every so often to keep the battery charged. This obviously can cause condensation in the engine. I have driven it only 30 odd miles and it's still there. I changed the oil the other day. Any suggestions on how to clean it out?
190
« on: 10 December 2011, 10:34:09 am »
Where do i find the paint code for a gen 1 fazer 1000? Is it under the seat?
191
« on: 08 December 2011, 01:28:42 pm »
Hi, I'm looking for a gen 1 fazer 1000 uk headlight. I have one suitable for r/h drive countries. 'possible swap' Send pm if anyone's got one in good condition.
192
« on: 04 December 2011, 10:08:52 pm »
Hi Thinking about buying a fazer gen 1 import, unfortunately i don't know what country it has come from apart from the fact it has kph clocks with a speedo converter and the headlights point in the wrong direction. Is there any way to find out what country its from and history? The other thing is it's an '03 with the later galaxy blue / silver engine from the '04. Any help would be great.  The other REALLY important thing is if it is restricted in any country.
193
« on: 26 November 2011, 02:41:39 pm »
Just received my bike mag subscription through the door. There is a section with 'top 25 bikes that do it all'. Our fazer 1000 is highly rated (Don't want to tell you the results in case i piss someone off, who hasn't read it yet!) plus there is another story 'practically perfect' where the top bikes compete against each other. I can tell you we do well again! Enjoy!
194
« on: 17 November 2011, 05:56:36 pm »
I've got an issue with my gen 1 fazer when i snap open the throttle it hesitates then picks up. if i roll the throttle open it's fine It seems worse when its cold. I noticed the exup valve was out of adjustment, so corrected it, i also set the throttle position sensor. The way i did it was that you raise the revs to 3800 rpm then adjust until the revs are at max then tighten turn off then on and adjust tick over. Both of the adjustments didn't seem to make much difference Any ideas?
196
« on: 12 October 2011, 06:15:02 pm »
I've just bought an ais removal kit from justy1 and was wondering if its possible to remove the ais system without completely removing the radiator (Don't need to tap threads) Would i be able to unbolt the radiator and push out theway, while leaving the hoses attached. The reason i ask this is because the bike is very high miles '108 000' and i have already replaced one of the hoses due to fatigue and i don't want to remove them unless its necessary.
197
« on: 11 October 2011, 10:41:27 pm »
I'm looking for a new set of rubber for my full monty fazer. I have had a set of diablo corsa's and thought they were really good, but the rear wore out pretty quickly, so i bought a standard diablo rear. I don't rate it as its not as grippy. Has anyone tried the corsa 3 or diablo rosso corsa ? I like the write ups for the diablo rosso, but is it too extreme for the fazer. ie... its more suited to light hypersports bikes and wouldn't work on a 200 kg + fazer
|
Show Posts
