HELP
my speedo packed up the other day so i stripped the front down and found the rotor sensor damaged
---no diagnosis readings given on rev counter----(did once while riding but only once)
new one fitted and put together CORRECTLY no snapped lugs etc
still no speedo, getting no pulse signal to the spedometer (white wire) just sits at 3.8V
readings on the loom side of the speedo plug
blue and yellow - 12V / white 4.61V / black and blue 0V and earths
if anyone could test that they have 4.61V on there white wire would be helpfull as that is the only one i dont think should have any voltage
all advise will be taken its driving me and my father nuts (we hate modern electronics)