Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Mr Juju on 03 April 2013, 10:11:51 am
-
Hi All, new to Fazer ownership (3 weeks) but haven't smiled soooo much in ages.
I am getting a horrible vibration / clunking through the pegs most noticeable at about 4,000 revs - 40 mph but seems to be there whenever I throttle on.
Don't notice it when I hit the powerband ;)
Any ideas , I have had a quick look around the forum but can't seem to find anything.
Cheers!
Pete
-
Check your drive chain adjustment and the front sprocket!
-
Look at the actual chain as well for links that don't appear to be as horizontal as the others, you may have seized/rusted links.
They tend to sit at a slight angle, and will make the chain a bit lumpy which will be felt through the left foot peg.
Maybe worth laying off the power band until you sort this problem out!
-
I had the same problem last week and it turned out to be a tight spot in the chain, Im fitting a new chain and cogs tomorrow so ill tell you how it goes
-
Had this when I first bought my red bike, turned out it needed new chain and sprockets... happened at exactly the same speed / revs that you mentioned as well
-
I had the same problem last week and it turned out to be a tight spot in the chain, Im fitting a new chain and cogs tomorrow so ill tell you how it goes
I suddenly had 2 links seize up on my chain, even though i cleaned and lubed it regularly, i think the bad weather and salt just takes it's toll over time.
Had a nice new chain and sprockets fitted yesterday, now it feels sweeeeet :)
-
Excellent! Thank you all for your helpful and prompt replies.
I will give the chain a thorough examination and see what I can find :)