Date: 30-04-24  Time: 15:00 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - icky

Pages: [1]
1
Fazer 1000/FZ1 corner / Re: datatool alarm removal
« on: 11 September 2017, 06:30:01 pm »
Quote from: Flooky on 11 September 2017, 04:27:43 pm
Cheers, what about starter motor wire etc ? is it just one wire that imobilises?
It depends how good the alarm fitter was, there is usually two, one for the ignition side and one for the fuel pump. If you're not confident it
is probably best left alone especially if there are no issues at the moment. I had no choice with mine, I would disarm the alarm and hit the starter
but nothing would happen until I rattled the alarm box!

2
Fazer 1000/FZ1 corner / Re: datatool alarm removal
« on: 11 September 2017, 03:03:54 pm »
I only removed mine last week, very straight forward really, just trace the wires from the alarm and into the bikes wiring loom, then remove the
black wires from the loom. there will be two wires in the loom you will need to reconnect, these are what creates the immobilising side of the alarm.
The other wires are for the indicators and are only attached to the side of the loom wires, these I just cut the black wires off with out cutting the loom
and them tapped over. Then just re tape the loom back making sure the bike starts first.  :)

3
For Sale & Wanted / Re: Fazer 1000 JACK UP DOG BONES (RAD COVER NOW GONE)
« on: 19 January 2016, 09:07:41 pm »
Forgot all about these too  :)

4
For Sale & Wanted / Re: Standard Fazer 1000 Gen1 handle bars and end wieghts
« on: 19 January 2016, 09:06:09 pm »
Forgot all about these...Still for sale  :)

5
For Sale & Wanted / Re: Standard Fazer 1000 Gen1 handle bars and end wieghts
« on: 31 October 2015, 11:24:13 am »
Hi I would prefer pick up, but UK delivery is probably around £8.00.


6
For Sale & Wanted / Re: Fazer 1000 JACK UP DOG BONES (RAD COVER NOW GONE)
« on: 31 October 2015, 09:56:55 am »
Bump :)

7
For Sale & Wanted / Re: Standard Fazer 1000 Gen1 handle bars and end wieghts
« on: 31 October 2015, 09:56:08 am »
Bump :)

8
For Sale & Wanted / Re: FOR SALE, RACK FOR A GEN 1 FAZER 1000
« on: 24 October 2015, 04:57:46 pm »
Now sold....Thanks

9
For Sale & Wanted / Re: PYRAMID SCREEN FOR THE GEN1 FAZER 1000
« on: 24 October 2015, 04:57:15 pm »
Now sold..Thanks

10
For Sale & Wanted / Re: FOR SALE, RACK FOR A GEN 1 FAZER 1000
« on: 21 October 2015, 08:29:59 pm »
Hi there, yes still for sale...Steve

11
For Sale & Wanted / Re: FOR SALE FAZER 1000 POWERBRONZE SCREEN
« on: 12 October 2015, 03:45:13 pm »
Hi, yes all received and all boxed up so the good lady of the house can take it to town to post tomorrow morning.


Many thanks Steve

12
For Sale & Wanted / Re: Fazer 1000 JACK UP DOG BONES (RAD COVER NOW GONE)
« on: 12 October 2015, 10:29:46 am »
Hi Devilsyam,

Please can you PM me your address details for the rad cover...Thanks Steve

13
For Sale & Wanted / Re: FOR SALE FAZER 1000 POWERBRONZE SCREEN
« on: 10 October 2015, 11:10:39 am »
Quote from: Exupnut on 10 October 2015, 11:01:28 am
Ooooooohhhhhh niiiiiiiicccceeeee
Power isn't something you usually associate with red so I understand why ur floggin it....pm me ur details an ill make sure it goes on a proper bike :-)


LOL that made me chuckle  :rollin


Dets on way.


Steve

14
For Sale & Wanted / Standard Fazer 1000 Gen1 handle bars and end wieghts
« on: 10 October 2015, 10:12:21 am »

Used set of straight standard bars for the Fazer Thou Gen1 with end weights.
£35Prefer pickup (South West Cornwall) because of the length these will probably cost a tenner to post :rolleyes
Paypal gift if you wish them posting please :) .
[/size]Steve

15
For Sale & Wanted / PYRAMID SCREEN FOR THE GEN1 FAZER 1000
« on: 10 October 2015, 10:05:25 am »
Pyramid Screen for the Gen1 Fazer thou, used but in good condition.
£23
Prefer pickup (South West Cornwall) but can post (£3.50) if paying by Paypal gift.
Steve

16
For Sale & Wanted / Re: FOR SALE FAZER 1000 POWERBRONZE SCREEN
« on: 10 October 2015, 09:57:24 am »
Piccys with screen on bike. I also have a Pyramid one too, please see other post  :)



17
For Sale & Wanted / Re: FOR SALE FAZER 1000 POWERBRONZE SCREEN
« on: 10 October 2015, 09:53:08 am »
Not as far as I know I'm afraid  :(

18
For Sale & Wanted / Re: Fazer 1000 JACK UP DOG BONES (RAD COVER NOW SOLD)
« on: 10 October 2015, 07:05:25 am »
The cover is now sold but the bone are still available, these will raise the back by 28mm and here is a link to the site. :D

http://www.metisse.de/tail-riser-yamaha-fzs-1000-fazer-617.html

19
For Sale & Wanted / Re: FOR SALE FAZER 1000 POWERBRONZE SCREEN
« on: 10 October 2015, 06:53:56 am »
I'll sort out a piccy for you today Mr Exupnut  :)

20
For Sale & Wanted / FOR SALE, RACK FOR A GEN 1 FAZER 1000
« on: 09 October 2015, 03:53:39 pm »
For sale is a renntec rack for the Gen 1 Fazer 1000.
Used with the usual marks and complete with fitting kit.
£35
I would prefer pick up (south west Cornwall) but could post (£8.50) if paying by Paypal gift.
Thanks Steve.



21
For Sale & Wanted / FOR SALE FAZER 1000 POWERBRONZE SCREEN
« on: 09 October 2015, 03:41:28 pm »
As the title suggests a screen for the Fazer 1000 (Gen 1) by Powerbronze
Used but in good condition. £20
Prefer pickup but can post (£3.50) if paying by Paypal gift.
Steve



22
For Sale & Wanted / Fazer 1000 JACK UP DOG BONES (RAD COVER NOW GONE)
« on: 08 October 2015, 08:51:47 pm »
For sale is a stainless steel grill for the fazer 1000 (£20)
and a pair of dog bones by Metisse (£20) (13cm center to center) both for the Gen 1.


Prefer pickup, I'm in South West Cornwall but can post (about £3.50 mainland UK) if paying buy PayPal gift.


Cheers Steve

23
Fazer 1000/FZ1 corner / Re: Which EXUP valve is the same as the Fazer 1000?
« on: 23 September 2015, 09:19:11 pm »
Hi,


As far as I'm aware the actual valve is the same, certainly this chap seems to think so on eBay (262052508632), although
he's written the part number incorrectly and it's very expensive but probably not as much as Yamaha would charge?


Hope it helps ... Steve

Pages: [1]