This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - caretaker
26
« on: 07 September 2012, 08:23:03 pm »
on my instrument panel, there is a button which has 'clock' next to it. does that mean a proper clock, or a tripmeter or something? my haynes manual says nothing and i dont have the little handbook for it.
27
« on: 25 August 2012, 03:39:22 pm »
if anyone has a knackered/blown up/damaged fazer gen 1 600, i'm looking for a base for a project. engine condition not important or suspension, as long as its mostly all there. dont want to travel further north than the midlands really, or further east than reading. must be dirty cheap mind! Ta.
28
« on: 23 August 2012, 12:30:14 pm »
if anyone needs to borrow a 32mm socket for their front sprocket in the south/west/mid wales area, send me a PM. its the big impact driver version.
29
« on: 23 August 2012, 10:00:03 am »
i saw a pic on here somewhere of a modified/prototype 600 fazer. i think it was an artists impression with one headlight blanked off like an endurance fairing. anyone know what i'm on about?
30
« on: 17 August 2012, 12:36:46 pm »
if you have a shabby gen 1 600 fairing lying around, i'd be interested. if you have a headlight assembly and the nearside one is broken, i'll have that too! dont ask, its for a project i'm working on.
31
« on: 06 August 2012, 10:53:18 am »
coming home last night and as i come into a roundabout i can hear a loud clattering noise. at first i thought my chain had stretched and was thrashing about but it was ok. could it be the clutch?
32
« on: 03 August 2012, 12:02:25 pm »
bit of a long shot but if anyone has a trail type rolling frame with V5 not too far from the south wales M4 corridor, i'd be interested. i have a cb250 rs engine so it needs to be roomy enough for a 4 stroke motor. thanks. (BTW i'm on ebay every day!)
33
« on: 21 July 2012, 06:48:03 pm »
first proper thrash on the fazer 6 in the dry and loved every minute! lots of plod about though. the local mecca for bikes (llandovery) was heaving with power rangers posturing with their gleaming steeds, so i moved on up to the nearest burger van with a good number of proper bikers there. cracking day though.
34
« on: 18 July 2012, 09:42:01 pm »
is it me or is the 600 seriously bad around town? it judders and jerks like the cush drive rubbers have been removed and you have to stay in 2nd gear permanently. my divvy 600 was smooth at 15-25mph. on the open road however, its a great bike especially in the sweepers. but i'm seriously looking around for a little 125 just for town use. sachs madass would be cool but they aint cheap.
35
« on: 11 July 2012, 05:35:07 pm »
can a thundercat front end be retrofitted to a gen 1 600? they look similar in the haynes manual but the YZF ones have more adjustment
36
« on: 09 July 2012, 11:42:12 pm »
i need a reasonably priced DB screen for a 2000 600 in a dark tint. actually i need two as my mate is after one as well!
37
« on: 07 July 2012, 03:52:11 pm »
just took off the sprocket cover to check whether the sprocket nut is the correct one, and the gasket falls apart. i went on the wemoto site but they only do the complete gasket set. anyone know where to get one or is it a case of make your own? ta.
38
« on: 04 July 2012, 07:48:48 am »
few of us in my local club are so fed up with the weather, we organised a rainy rideout. not many miles but there were six of us in the pouring rain having a laugh. we stopped in a pub siitting in our not particularly '100% waterproof' clothing but it was good to get out there. it looks like this weather is here to stay for a while so get out there and enjoy!
39
« on: 01 July 2012, 07:51:46 pm »
the west wales motorcycle show is on the 18-19th august in the carmarthen showground SA33 5DR. £8 per adult, accompanied children under 16 free. look on www.westwalesmotorcycleshow.co.uk for more details. torrential rain provided free of charge.
40
« on: 29 June 2012, 09:11:50 pm »
does anyone know what the paint code is for a 2000 gen 1 600 in silver? ta.
41
« on: 29 June 2012, 08:45:32 pm »
i have a genuine yamaha hugger for (i think) an 04 600 in black. good condition with one scuff mark. £30 plus carriage or offers. i need a gen 1 hugger if anybody has one.
42
« on: 25 June 2012, 09:21:14 pm »
does anybody have any of these for a gen 1 600? belly pan and seat cowl in any condition. ta!!!
43
« on: 23 June 2012, 07:55:01 pm »
has anyone got one of these fitted to their bikes? and how much does it cost initially, and yearly subscription?
44
« on: 20 June 2012, 07:19:31 pm »
dont store it on the floor of your shed if you do some sawing and filing etc. the magnets picked up bits of swarf and when i took the bag off my shiny fazer, there were little scratches on the tank. doh...
45
« on: 12 June 2012, 08:12:13 pm »
if anyone has a slightly battered or broken belly pan, i would be happy to take it off your hands. ta!
46
« on: 11 June 2012, 07:40:27 pm »
i know the 25mm jack up thing has been done to death, but is there any benefit to buying a more expensive kit or is the cheap one just as good? ta.
47
« on: 09 June 2012, 01:51:30 pm »
does anybody have one? i know there are the downloads but i like a hard copy of my own cos i'm an old git.
48
« on: 08 June 2012, 09:55:32 am »
my new fazer gen 1 stinks of petrol constantly and a bit of white smoke from the pipe. the previous owner reckoned he only got 40mpg. what needs doing? is it a carb balance or a retune? other than that, its a very clean low mileage bike. ta.
49
« on: 07 June 2012, 05:08:42 pm »
just bought a clean fazer 600 gen 1 which has a givi rack and e46 top box which i dont need. any takers for £200? pic soon.
|
Show Posts