Date: 29-03-24  Time: 12:48 pm

Author Topic: center stand/after market end can  (Read 971 times)

Dea-ville

  • Weekend Warrior
  • ***
  • Posts: 100
    • Main bike:
      FZS 1000 Gen1
    • View Profile
center stand/after market end can
« on: 07 April 2017, 09:05:59 pm »
Hi all,  to those of you that have fitted after market end cans, which cans allow the center stand to be retained. Cheers.

Mick-H

  • WSB Pack Hound
  • *****
  • Posts: 764
    • Main bike:
      FZS 1000 Gen1
    • - Honda C90
    • View Profile
Re: center stand/after market end can
« Reply #1 on: 07 April 2017, 09:16:38 pm »
I'd say most of em, but I could be wrong. ;)

PieEater

  • GP Hero
  • ******
  • Posts: 1,359
  • Thank You Melton Mowbray, Yamaha & Ivan
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: center stand/after market end can
« Reply #2 on: 07 April 2017, 10:32:58 pm »
I've not heard of any aftermarket cans for the Gen1 that require the removal of the centre stand, but if you wanted to be sure you could contact the manufacturer or post on here to see if anyone has the can you are thinking of.

RMT1983

  • WSB Pack Hound
  • *****
  • Posts: 606
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: center stand/after market end can
« Reply #3 on: 09 April 2017, 07:29:00 pm »

as long as your fitting a fzs1000 link pipe then most end cans would fit, the fzs1000 is 60mm at the collector, most end cans are 52mm.............


the only issue you will have really with end cans not fitting is if you try and fit a stupidly short one that doesn't reach to the pillion hanger fixing point

Andy W

  • Weekend Warrior
  • ***
  • Posts: 161
  • www.thesundogs.uk Rockin' rollin' rhythm & roots
    • Main bike:
      FZS 1000 Gen1
    • View Profile
    • The Sundogs - rockin' rollin' rhythm & roots!
Re: center stand/after market end can
« Reply #4 on: 09 April 2017, 07:50:02 pm »
Viper, Art & Fuel that I know of for sure!