This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Robfzs
Pages: [1]
1
« on: 28 May 2014, 07:25:14 pm »
 comes with everything you need to fit it to your fazer, £50 but willing to accept offers ( postage is £10) thanks
2
« on: 24 April 2013, 03:26:53 pm »
tried everything, dremel slot, chisel/ punch, heat gun, hammering, got a little bit of it off, but by now if it was normal it should have peeled off, so it must be welded to the hub, any ideas to remove it ?
thanks
3
« on: 07 June 2012, 10:36:56 am »
anyone got one in good condition that isn't bent ? thanks
4
« on: 31 May 2012, 08:45:07 pm »
5
« on: 27 May 2012, 09:47:39 pm »
anyone know if its possible to get them out ?
mines either dirty or has scratches on,i'll post some pics up tomorrow
6
« on: 21 May 2012, 08:50:06 pm »
fitted the new braided lines and go to bleed it up
do the opn nipple,pull lever,close nipple let go of leaver a fair few times and nothing happensfluid level doesn't change or anything,take off the hoses from the mc and no fluid comes out when i pump ?
any ideas
7
« on: 16 May 2012, 11:58:51 am »
as the title says,anyone got one that doesn't have seized resevoir bolts and works perfectly ?
thanks
8
« on: 30 April 2012, 08:40:01 pm »
9
« on: 22 April 2012, 09:01:59 pm »
going to do the brakes soon,but the screws are pretty chewed up so need to replace them,what sizes are they ? and where could i get a pair from?
thanks
10
« on: 24 March 2012, 04:11:20 pm »
seem to have lost mine when i changed the oil last
anyone know the size/where to get one ? thanks
11
« on: 22 March 2012, 08:07:45 pm »
for fazer 600 99'
cheers
12
« on: 15 March 2012, 04:40:12 pm »
Hi,i wanna replace all the old rubber lines with stainless braided hoses and change all the pads while i'm doing it
any lines/pads people reccomend ? thanks
13
« on: 29 February 2012, 03:07:35 pm »
how many miles do you have left once the light starts to flicker? thanks
14
« on: 27 February 2012, 07:41:20 pm »
seen a few on ebay for the fazer to do an oil change and change the oil filter,whats other people bought on there?
15
« on: 29 January 2012, 04:51:54 pm »
16
« on: 08 January 2012, 02:10:25 pm »
Got some renthal ultra lows for my fazer 6,any cheapish grips people suggest ?
17
« on: 27 December 2011, 08:35:54 pm »
mines cracked after an off,anyone got one spare?
18
« on: 19 October 2011, 09:01:48 pm »
riding home tonight,around 4k revs all the way with HIDS on, i stopped at a junction,put the indicator on and the rev counter and trip meter died,switched the indi off and they were fine again,gave it some beans after that and tried putting the indi on again at another junction and it was fine.
what suggests is knackered ? the batterys about 4 years old now,but still starts on the button
19
« on: 05 October 2011, 09:27:06 pm »
finally this forum works properly again
anyway,one of the heater pipes has split and dribbling out coolant,pretty annoying
anyone know where i can get a replacement ? it goes from carb 1 to carb 4
Pages: [1]
|
Show Posts
