Hello all,
I have had a browse around and I have not seen a topic with the same issue so thought I would list a new topic.
Right so the basics, I have a:
Fz6 s2 fazer
58 plate
11k miles (only bought this with 5k on clock in Dec :P)
I have been noticing the error code 43 (not reading battery voltage) coming up when turning the ignition on this is an intermittent fault. I have the feeling it is the fuel relay box that may have water corrosion (not unsealed it so not 100% sure)I have tried the diagnostics check 50 (if I remember correctly) and this shows to be @ 0.0.
I have also checked all the terminals and they appear to be fine(connections wise along with external.
Symptoms:
-When putting the bike ignition on, the fuels pump starts but it doesn’t turn off unless the error code 43 turns off and so the engine warning light.The bike itself runs fine and no drop in power, after riding a -while or leaving the ignition on the warning light eventually disappears and so the fuel pump stops consistently running.
Well hope you can all shed a bit of light on this I will be trying a new battery off a friend’s fazer to see if It is a battery fault but any advice would be appreciated.
Cheers guys and gals
