Date: 29-11-21  Time: 11:13 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Papa Wheelie

Pages: [1]
2
Fazer 1000/FZ1 corner / Re: Quickshifter
« on: 28 July 2020, 05:28:25 pm »
Have the Healtech Easy installed on 1st Gen FZ1. Advantages include less clutch wear, Quicker smoother upshifts and downshifts gears 3-6 and 6-3. Comes with a bypass plug that allows disabling or for testing. About a 1 hour install tapping into the coils under the tank routing and securing wires to the ECU placed under the seat and making sure the sender is firmly attached to the shift lever bolt with the special compression washers in place. Disadvantages include learning to ride without touching your shifter as any tap even from a bounce can momentarily cut power and if this occurs at the same time as manually clutching it can result in a missed shift at higher RPM then a lurch forward as you realize you are accelerating still in a lower gear. After learning to shift more precisely and firmly without resting on the lever the quickshifter becomes a breeze to use. 1st+2nd gear quickshifts up or down are very harsh and not recommended if you experience this as the manual says then to avoid them. You must have the transmission under load (meaning accelerating or constant throttle) to clutchless shift or you will crunch gears. Once programmed and understood the Healtech Quickshifter Easy is like butter shifting at full throttle like an automatic transmission up and down. Saved me 3/10 in my quarter mile drag times and adds alot of enjoyment and smoothness for spirited clutchless street riding

3
For Sale & Wanted / 4 Sale...New Dainese Race Boots size 43 Euro
« on: 26 July 2020, 09:01:40 pm »
These are my never used, one pair only, with warranty card in original box. Euro size 43... $300 U.S. dollars thru PayPal buyer pays shipping from USA

4
Introduction / Papa Wheelie's 2005 FZ1 Bobber
« on: 12 July 2020, 02:33:59 pm »
Hi! i'm Papa Wheelie....Started with OEM as shown... All mods self installed. All body work and exhaust designed and chopped from stock parts by me including my secret 6 hp gain exhaust mod. Vertex aluminum 4 up 1 down on a 420 2 extra link chain, Dale's jet kit with pods over velocity stacks and 4° advance. Cat and exhaust recirculation removed. Intake boots ported. Kevlar clutch with +20% springs and R6 1/6th turn throttle, Galfer steel braided brake lines and rear rotor, Two Yana Shiki front rotors, Healtech Quick Shifter, Gear indicator and Speedo corrector, All LED lighting includes Hikari Ultras h4's up front and my own custom modified 1157 tube insertions in the rear, Aluminum adjustable kickstand and wishbones allowing 3-1/2" lowering capability with a tie down or normal street operation. Bike has lost 27 kilos due to chops and parts replacements and turned a 9.9 sec / 142mph quarter at sea level.

Pages: [1]