Hi
 
I thought it was an MOT failure if the Clutch/brake lever or handlebars hit the fairing or the handlebars trapped your thumbs against the fuel tank.
ATB YFM
   

Hi
Weren't the carbon-look clocks and adjustable shocks brought in for 2001?
Mine a W Reg 2000 with carbon-look clocks and adjustable shocks.
 
ATB YFM
 
 
 

Hi
 
Under the new laws in France you cannot pinpoint an individual camera, so the new GPS speed camera databases are speed camera zones where a camera or cameras may be situated.
 
ATB YFM

Hi
 
You can remove the 4 rubber bungs from the seat pan this drops it a bit, and then put two strips of tape along the frame to protect the paint.
You can also put two small spacers bettween the seat latch and the frame to lower the latch to compensate for the drop.
 
ATB YFM

We have had the Tefal and the Phillips if you have the space the Tefal is the best.
If you choose the Tefal be carefull with the stirer / turner over thingie, I dropped ours and broke the end off (That'll be £30 + P&P thankyou)

If any one wants an actifry parts list

https://dl.dropbox.com/u/70564722/ActiFry%20%20%20Parts%20List.jpg

 ATB YFM

This is a direct replacement HID for an H4 headlight bulb this one uses a solenoid controlled sliding mask to obtain dipped beam
Link :- https://dl.dropbox.com/u/70564722/H4.JPG
ATB YFM

Hi

The wife was getting cramp on the pillion.
So I made some Rear Footrest Hangers that moved the footrests forward 50mm and down 50mm
you can get the 30mm x 5mm steel strip 1M long from the larger B&Q's

 https://dl.dropbox.com/u/70564722/87.jpg
https://dl.dropbox.com/u/70564722/88.JPG
https://dl.dropbox.com/u/70564722/90.JPG
https://dl.dropbox.com/u/70564722/100.JPG

ATB YFM
 

Hi
 
With the Ducati rearsets fitted have you pushed the bike off the centerstand.
I seem to recall the lever that you put your foot on when operating the centerstand with my mod fitted came quite close to the footrest
and the Ducati ones look a lot further back and may clash with the centerstand foot lever.
 
ATB YFM 

Hi
I also made some Rear Footrest Hangers that moved the footrests forward 50mm and down 50mm
The wife was getting cramp on the pillion.
 https://dl.dropbox.com/u/70564722/87.jpg
https://dl.dropbox.com/u/70564722/88.JPG
https://dl.dropbox.com/u/70564722/90.JPG
https://dl.dropbox.com/u/70564722/100.JPG
ATB YFM
 

Hi

Well done I knew you could do it
Halfrauds have offers on large tins of ellbow grease 
 
ATB YFM

Hi
Its a H4 direct replacement with solenoid dipping.

https://dl.dropbox.com/u/70564722/H4.JPG

I'll looked up the info for you :-


From My Confirmation Email

Thanks for shopping with us today!
The following are the details of your order.
------------------------------------------------------
Order Number: XXXXX
Date Ordered: Tuesday 27 XXXX 2010
Detailed Invoice:
http://www.vvme.com

Products
------------------------------------------------------
1 x Digital Slim H4-3(9003) Bi-Xenon HID Kit (VVME-HKB93-DSL)  = £47.70
   Color Temp. 4300K
1 x Single Beam HID Bulbs (VVME-HBBSB)  = £10.75
   Bulb Type H1
   Color Temp. 4300K
------------------------------------------------------
Sub-Total: £58.45
Express Shipping(3-10 Business Days)  (Express Shipping To GB (1 x 2.50kg)):
£24.06
Total: £82.51

I also brought the optional relay harness, it takes the switching load off the Fazer dipp switch.

The rear part of the bulb clears the forkleg on full lock OK.
 
ATB YFM
 

Hi

On the offside of my mk1 Fazer I've installed a direct replacement HID light with a solenoid dipping mechanism.

Link to earlier post :- http://foc-u.co.uk/index.php/topic,3734.0.html



 
ATB YFM