Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Jazoli on 01 August 2015, 05:18:50 pm
-
I have managed to source a shock for my bike, can anybody tell me what length bones are required to retain the standard ride height and what is the difference without them?
TIA :)
-
hi if you get a set of dog bones measurements from center of bolt hole to the other center of bolt hole measures 13cm that should give you back standered height with the r6 shock mod hope this helps.
-
hi if you get a set of dog bones measurements from center of bolt hole to the other center of bolt hole measures 13cm that should give you back standered height with the r6 shock mod hope this helps.
Thanks :)
-
I've never seen anything like it before.
-
Great info Fazer Blue, I plan to source my own shock and do my own conversion in the winter, I know a mate who can get lazer cutting done so that info is all I need to know.
-
You can get the correct bones from us ebay
http://pages.ebay.com/link/?nav=item.view&id=280374483308&alt=web
Or Suzuki DL650 50mm jack up kits are 129mm and close enough if you don't want to wait, on UK eBay
http://pages.ebay.com/link/?nav=item.view&id=120964049800&alt=web
-
Or you could just ask me
-
Or you could just ask me
I could have done but I thought you were on Holiday and thought there'd be others that would know :)
-
yep i was but back now your call have them here powder coated correct size etc
-
don't forget about the washers devilsyam will give you the details i am sure and you need to drill the top bolt hole as well
-
don't forget about the washers devilsyam will give you the details i am sure and you need to drill the top bolt hole as well
Cheers I hadn't forgotten 2mm washers and drill the top bush out to 12mm ☺