Date: 27-04-24  Time: 13:32 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mogster

Pages: [1] 2
1
FZS600 Fazer / Re: Rough running a low rpm / slight miss fire
« on: 16 June 2018, 06:28:32 pm »
well my tps went at just over 10k ordered it from my local bike shop, he reminds me of arcwright rushed me 80 notes still felt cheap seein
oem part was three times the price :eek

2
General / Re: Scuffed someone's bumper...
« on: 24 April 2018, 07:07:22 am »
dont know if there is a chips away in your area,but they are good but i assume you have weighed up the odds i personally wouldnt trust myself
to do a job i didnt know on someones banger.

3
FZS600 Fazer / Re: Front sprocket nut removal
« on: 13 March 2018, 04:09:25 pm »
reminds me of the first service i did on my bike' ended up with a  screwdriver through the
oil filter and a friend on the other side with a claw wrench. That was foccin tight and didnt need
to be as well.

4
FZS600 Fazer / Re: Fazer 600 won't start
« on: 31 January 2018, 05:23:15 pm »
Quote from: Disorderlypunk on 31 January 2018, 05:04:11 pm
nine hundred and sixty third reason is fueling up with custard
foc i almost plopped on that one :lol

5
FZS600 Fazer / Re: Tall rider… 2000 FZS600
« on: 18 January 2018, 06:33:18 am »
Hi bud. im 6-3 inside leg is 32, i find it difficult to stand on the pegs, i wouldnt lower the pegs they seem low enough; i did get myself gel booster seat witch helps a bit  i looove the bike and went about a hundred miles to see.. I looked for a year as if no foccer would sell round my way.
lots of tall people ride them fella... they are a little cramped for us normal people :'(

6
FZS600 Fazer / Re: Over fueling "pop pop pop"
« on: 10 January 2018, 07:32:45 pm »
i had the same at one point this maybe the beginnings of the tps problems worth a check perodicly
cos they is sneaky

7
FZS600 Fazer / Re: My Rat Fighter
« on: 28 November 2017, 07:47:01 pm »
Woooo  rats have feelings you know, even butchered ones :lol

8
FZS600 Fazer / Re: Replacing Rear brake disc
« on: 20 November 2017, 07:06:03 pm »
Hi all just thought i would mention that one of the foccer members managed to use a dremell or simalar
with a bendy attachment and a small wire brush to clean the offending area. takes a couple of hours but
well worth the time. against a new wheel sorry cant find the link hope this helps   mogs.

9
FZS600 Fazer / Re: Stuck rear calipers
« on: 01 November 2017, 11:26:56 pm »
oops what i meant to say was caliper piston removal pliers, as they grab the piston on the inner surface,
i would be interested to  know if pulling the piston out rather than actuating pressure to it would be bad for
the brakes. as i have  only cleaned once using these. stainless banjos essential   mogs

10
FZS600 Fazer / Re: Stuck rear calipers
« on: 01 November 2017, 06:39:54 pm »
hi all, i bought myself a set of caliper removal pliers (sealy} and i cant praise them enough. i was impressed with the control, moving the pistons in / out and turning to them for cleaning  cheers


11
FZS600 Fazer / Re: Am I missing something?!
« on: 06 April 2017, 06:45:34 pm »
this is still needing breather pipe leading almost  out the bottom of the bike. i know this cos i didnt re attach mine and got told it affects the performance.
or is that the over flow leaking into the air box as Disorderly punk says; i still havent done mine :evil

12
FZS600 Fazer / Re: Bike didn't start!
« on: 31 March 2017, 05:05:20 pm »
my bike mostly starts no choke. wont start on full someone said to me that the carbs wear quicker if used badly and the
bike runs richer than rich. so im wonderin if my bike has had the foc ridden of it

13
FZS600 Fazer / Re: Bike didn't start!
« on: 31 March 2017, 04:48:38 pm »
 nice  :faz darsi  :thumbup black n unpredictable  :wall hope you solve the riddle mucker.

14
FZS600 Fazer / Re: How Does My Sprocket look To You
« on: 31 March 2017, 04:18:07 pm »
hi matey looks cool' about the same as mine looked after 10k mind that mine has had 5 owners.
 possibly up for sprocket change as they are case hardend. i will be changing mine this year :rollin i hope to anyway...
some say change the whole lot together, but i like the three front to one back theory
                                                         safe ride one and all mogs.


15
FZS600 Fazer / Re: tps not working
« on: 14 March 2017, 09:11:00 pm »
All good then :)

16
FZS600 Fazer / Re: tps not working
« on: 13 March 2017, 09:25:18 pm »
do you mean the fzs 600s is the same tps as the fzs 600    i wasnt sure and didnt know the part number.. ya kno how they bite ;)
 so i went with the info sooo kindly provided and am gratefull cos my baby is pulling like it should. :rollin

17
FZS600 Fazer / Re: tps not working
« on: 13 March 2017, 05:15:45 pm »
yes back to as before, not sure what you mean by stutter. mine was like a misfire every now and then witch got worse.
  i think it was like it for 5 to 600 miles. but i didnt realise  the rev counter was throwng a paddy like that for a reason other than damp, so i aint a good refrence.  hope it solves your problems.. couldnt find tps on ebay for mine. all the best

18
FZS600 Fazer / Re: tps not working
« on: 12 March 2017, 09:29:29 pm »
good eve all. bike running rather well now.

19
FZS600 Fazer / Re: thicker sprocket nut worth a check
« on: 12 March 2017, 09:19:35 pm »
they are not  tight :eek

20
FZS600 Fazer / Re: tps not working
« on: 11 March 2017, 08:37:06 pm »
how the foc unfazed found all that info beats me but what a champ fella for sharing' and friendly advice. i cannot get over it  :rollin

21
FZS600 Fazer / Re: tps not working
« on: 11 March 2017, 08:25:52 pm »
hi darrenc fitted tps today diagnostic is doing what it should when unplugged and plug refitted.
havent rode her yet.       when faulty it was readin 10000rpm with no adjustment. i did take 10 mill of the end of leads it didnt alter the tps.  the new tps has a3 stamped on the back mine has a2' the man at the shop said the part number is all that is relevant.

22
FZS600 Fazer / Re: Back on the road
« on: 10 March 2017, 03:41:11 pm »
ride on brother  8)

23
FZS600 Fazer / Re: tps not working
« on: 06 March 2017, 09:30:55 pm »
Evening everyone. here is a shout out to the kind people who have not only guided me but saved me about a hundred pounds. :thumbup
orderd  my new tps  today should have it friday maybe.  ps it is running but a bit rough and briefly cuts. its all making sense doh :o
                                   thank ye all   mogs

24
FZS600 Fazer / Re: tps not working
« on: 05 March 2017, 02:38:29 pm »
Thank you again. i will be buying a new unit but saying that i do normally learn the hard way.
now you say it that is bang on below 3000 revs is different to before' i did notice it but thort it was me.
went and had a look today took screws out got a 5000 reading just past  ie 1/3 of the hole was there didn't
have smaller diamiter nut and bolt to try plus i dropped the case screw it fell forward and has stuck somewhere need to take torch next time as my bike is in garage that is a bit of a walk. cheers guys mogs

25
FZS600 Fazer / Re: tps not working
« on: 05 March 2017, 10:30:33 am »
wow :eek thank you townhill and darsi very much that will take me a while to digest,very interesting.
as i did have recent plugs air filter and c/balance.   mogs
           


Pages: [1] 2