Carbs are the same, all jets sizes are the same. The main difference is in the float height with the 2000 - 2003 models set to have the fuel level 1mm lower. The 2002-2003 have a different the pilot screw which is set to 2.5 turns out whereas the 1998 to 2001 are set to 2 turns out.
I know this is an old post, does anyone know which way to adjust the pilot screws to lean out the tick over.The reason I'm asking is I have fitted a jet kit with bigger pilot jets and it stinks on tick over, smells like to much fuel.
Turn out more fuel (Anticlockwise).Turn in less fuel (Clockwise)Was there not an option to increased the air jet to cater for the increase in pilot jet size.Are all the O rings intact and the needle set to the correct height.
Quote from: unfazed on 20 February 2023, 07:23:34 pmTurn out more fuel (Anticlockwise).Turn in less fuel (Clockwise)Was there not an option to increased the air jet to cater for the increase in pilot jet size.Are all the O rings intact and the needle set to the correct height.Hi unfazed,I will set the screws to 2 turns to see if it makes it better, I don't want to fit pod filters.