Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - vivfazer

Pages: [1]

Fazer 1000/FZ1 corner / R1 fork setting for Gen 1

« on: 17 July 2021, 09:25:00 am »

Hi,
I’ve fitted 1998/99 R1 front forks , changed the spring to 1.0 and new seals .
I’m not sure of the set up.
Need help please.

Fazer 1000/FZ1 corner / RADIAL FRONT BRAKE MASTER CYLINDER

« on: 13 February 2021, 06:24:05 pm »

Hi Guys,
I'm looking to change the master cylinder on my Gen 1 thou for a radial master cylinder,
What is the ideal one to fit.
I would be grateful for any advice.
Cheers.

Fazer 1000/FZ1 corner / R1 forks

« on: 27 March 2020, 08:46:36 pm »

Hi, I've got some r1 forks to put o my GEN 1 Fazer 1000
They are off 4xv model. Do I need to change the springs as I read the R1 springs are too soft for the fazer .
What are the best springs to use.
Cheers

Fazer 1000/FZ1 corner / fazer 1000 Gen 1 replacement spark plug caps

« on: 23 May 2018, 12:16:55 pm »

Hi,
I'm after changing the plug caps on my Gen 1 thou, does anyone know which NGK cap fit.
many thanks.

Fazer 1000/FZ1 corner / R1 fork mod spacer

« on: 19 March 2018, 08:36:46 pm »

Hi all,
Is anyone still making the spacer for the r1 fork mod on the fazer thou.
Cheers vivfazer.

Fazer 1000/FZ1 corner / Carb inlet rubbers

« on: 15 June 2017, 08:43:27 pm »

Hi all,
I need some advice.
I've noticed that the inlet rubbers between the carbs and the engine have small cracks in them, is this normal or should I replace them.
Cheers.

Fazer 1000/FZ1 corner / Poor tickover/ popping in exhaust .

« on: 26 May 2017, 07:44:11 pm »

Hi all,
I've balance the carbs but at tickover there is a popping in the exhaust but above 2000 revs ok.
Any ideas.
Cheers.

Pages: [1]