This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - davec
Pages: [1]
1
« on: 21 May 2017, 08:03:39 pm »
Good condition. Open to sensible offers. Pick up from Banbury or will post at buyer's expense.
2
« on: 01 December 2015, 09:14:41 pm »
Brand new still in the box OEM chain and sprocket set for 1998-2004 FZS600 £50 plus postage.
3
« on: 22 April 2014, 08:40:29 pm »
Genuine 1998-2003 FZS600 chain and sprocket set for sale £75 plus postage.
4
« on: 15 March 2014, 06:04:41 pm »
Genuine Fzs600 Drive Chain kit, brand new and boxed, for sale £100 plus postage.
5
« on: 09 March 2014, 02:17:19 pm »
I'm selling my FZS600 as I'm getting a bigger bike.
All the usual gumph - Bike has been very well looked after, service history up to 8000 miles, since then the previous owner and myself have done all of the servicing. Oil and filters changed annually, coolant changed last year, new brake pads fitted 1500 miles ago, recent carb balanced, new Metzler Z6 tyres fitted yesterday.
The bike is in very nice condition - it has a few age related marks, as you would expect. I've owned it for four years and it runs and rides superbly - it's been totally reliable. It's been kept under cover and not used through the winter, just the engine run every week.
A whole array of tasteful upgrades including:
Foxeye fairing.
Hel braided brake lines
TCP belly pan
Rear hugger
FZS1000 rear brake caliper upgrade.
Ermax undertray.
Simmi carbon exhaust.
Renthal ultra low handlebars.
Stainless downpipes.
Stainless bleed nipples on all of the brake callipers.
Iridiun plugs
K&N air filter.
New uprated 12mm front sprocket nut.
Brand new Metzler Z6 tyres (done 15 miles)
Fazer tool kit.
The bike has done 16500 miles and will come with 12 months MOT.
The chain and sprockets are in good condition, but I do have a brand new genuine Fazer chain and sprocket set that I can sell with the bike at a bargain price.
Yours for just £1650
Any questions, feel free to message me.
6
« on: 23 December 2013, 11:11:32 am »
FZS600 1999-2001 headlight unit for sale.Very good condition. £50 plus Postage
7
« on: 09 October 2013, 11:59:24 am »
I'm thinking of changing my exhaust to high level as a winter project,has anyone attempted this?If so,what link pipe and fixing bracket did you use?
8
« on: 05 September 2013, 09:22:11 pm »
I'm selling my FZS600 only because I want a bigger bike.It's a black 2001 bike with 16500 miles on the clock which I have owned for 3 years.
This is what it has:
Hel braided brake lines.
Renthal Ultra low bars.
TCP belly pan.
Rear hugger.
Ermax undertray.
FZS1 rear brake caliper.
Carbon exhaust.
K&N air filter.
Iridium plugs.
mini indicators.
Datatool s4 alarm.
Uprated 12mm front sprocket nut.
25mm jack up kit.(improves handling)
I've recently changed the coolant,brake fluid and pads.Oil and filter changed annually. Carbs recently balanced.
It has service history up to 8000 miles when the previous owner to me bought it and did all of his own servicing as have I.
I did a fairing conversion to a Foxeye over the winter as a project.It's a proper conversion with all of the electrics done to the highest standard and working as it would do on the Foxeye.
The bike has 10 months MOT and 10 months tax.
The bike is in excellent mechanical condition and runs beautifully.
I have only ever used the bike in fair weather so it is very clean with a few age related marks,as you would expect - even the exhaust studs and nuts are in excellent condition and copper greased.
I'm looking for around £1850.
Here are some pictures:
9
« on: 18 June 2013, 05:54:02 pm »
Clip ons on an FZS600. Good or bad, what are your opinions?
10
« on: 04 May 2013, 12:26:49 pm »
Anyone use them?are they any good for protecting the front of the engine and radiator etc?
11
« on: 13 February 2013, 08:16:26 pm »
Does anyone have a spare Fzs600 screen bolt, in black, and well nut they would like to sell to me? Thanks.
12
« on: 12 January 2013, 01:26:31 pm »
Does anyone have any idea whether the FZ1 (07-11) drag style handlebars will fit an FZS600 with the foxeye fairing? Thanks.
13
« on: 05 January 2013, 08:11:38 pm »
I'm looking for a pair of Foxeye fairing infills if anyone has some the want to sell.
14
« on: 12 November 2012, 07:15:06 pm »
Anyone got any Fzs600 foxeye fairing parts they want to sell?I'm looking for the rear mounting brackets,infills for both sides,rubber for the front screen and the nuts and bolts to fit the screen to the fairing and maybe the headlight wiring loom.Thanks.
15
« on: 10 November 2012, 05:04:14 pm »
Has anyone on here actually done this?I am just about to embark on this modification and would be interested to hear how you went about the headlight wiring as the two looms are completely different as are the fitments in the back of the headlight.The rest of it I'm happy with but electrics are not my strong point.I would be grateful for any information.Thanks.
16
« on: 08 November 2012, 07:00:41 pm »
Has anyone got Fazer 600 Foxeye headlights they want to sell?
17
« on: 05 November 2012, 06:51:18 pm »
Can anyone tell me the size of the bleed nipple for the front brake calipers .I think it's 8mm x1.25mm. Just want to make sure before ordering.Thanks for any replies in advance.
18
« on: 13 October 2012, 06:56:18 pm »
Has anyone got a Fazer 600 Foxeye headlight/fairing mounting bracket they want to sell?Thanks in advance for any replies.
19
« on: 26 June 2012, 10:45:02 pm »
Just read this on Facebook. ***** WARNING FOR BIKERS!! ****** [/size][/color] Police have been stopping bikers warning them that there has been a black Suzuki 4x4 delibartely knocking people off their bikes, 4 so far today: Winchelsea, Ore, Hollington and Bexhill, one fatality. PLEASE be careful out there. If true, worth watching out for!!!
20
« on: 12 May 2012, 09:25:04 am »
Is the foxeye front fairing interchangeable with the square eye, and if so, I'm assuming you will need to swap the mounting bracket and wiring loom from the switch to the front lights and the infills.Are the mounting brackets interchangeable or are they fitted to the bike at completely different points and are there any other things to consider.Or is it really that simple?Thanks for any replys
21
« on: 28 February 2012, 06:53:22 pm »
What threadlock would you recommend or have you used when replacing the front sprocket nut?I don't want to use the ultimate strenght stuff that has to be heated to 300 degrees before you can remove the nut but I want something that will hold the nut tight until I need to replace the front sprocket.Thanks in advance for any replies.
22
« on: 22 January 2012, 02:00:28 pm »
Any ideas on the best place to get Stainless nuts and bolts from?
23
« on: 08 January 2012, 04:40:13 pm »
Can anyone tell me does the FZS1000 (2001-2005) rear brake torque arm fit directly onto the FZS600 or does it need modifying? Thanks.
Pages: [1]
|
Show Posts
