This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - davec
1
« on: 30 May 2017, 07:08:44 pm »
Around £40 plus p&p.
2
« on: 29 May 2017, 09:36:05 pm »
Looking for a sensible offer mate.
3
« on: 29 May 2017, 09:30:47 am »
4
« on: 29 May 2017, 09:01:30 am »
Sorry for late reply. Will post some pictures now. Lights are in good clean
condition.
5
« on: 21 May 2017, 08:03:39 pm »
Good condition. Open to sensible offers. Pick up from Banbury or will post at buyer's expense.
6
« on: 01 December 2015, 09:14:41 pm »
Brand new still in the box OEM chain and sprocket set for 1998-2004 FZS600 £50 plus postage.
7
« on: 22 April 2014, 08:40:29 pm »
Genuine 1998-2003 FZS600 chain and sprocket set for sale £75 plus postage.
8
« on: 21 March 2014, 06:42:43 pm »
The seat was the original but was re-padded and re-covered.The torque arm came from a breakers on ebay.The Foxeye upgrade took a couple of years to put together as sourcing the parts was not easy,especially the fairing bracket,thats the only one I've come across, so that will be your main problem I would think.There is a thread on here somewhere that was put together when I did it,it has the wiring diagram you will need to upgrade to the foxeye lights and other pieces of information about doing the mod.If you can source all of the parts it's a nice mod to do.
It's strange I had no interest in the bike when I put it up for sale on here.But since I've sold it I've had no end of enquires,
9
« on: 20 March 2014, 02:05:54 pm »
The bike is sold.
10
« on: 16 March 2014, 03:35:26 pm »
Right,Seeing as they are are now £95 on ebay I will accept £80 plus postage!!!
11
« on: 16 March 2014, 07:11:47 am »
I'm only asking what I paid for it.
12
« on: 15 March 2014, 06:04:41 pm »
Genuine Fzs600 Drive Chain kit, brand new and boxed, for sale £100 plus postage.
13
« on: 09 March 2014, 08:34:11 pm »
Thanks Swem. If I could justify keeping it I would.I have put alot of time and effort into it. But it's better that someone has it and uses it.
14
« on: 09 March 2014, 08:07:24 pm »
Thanks mate.
15
« on: 09 March 2014, 02:17:19 pm »
I'm selling my FZS600 as I'm getting a bigger bike.
All the usual gumph - Bike has been very well looked after, service history up to 8000 miles, since then the previous owner and myself have done all of the servicing. Oil and filters changed annually, coolant changed last year, new brake pads fitted 1500 miles ago, recent carb balanced, new Metzler Z6 tyres fitted yesterday.
The bike is in very nice condition - it has a few age related marks, as you would expect. I've owned it for four years and it runs and rides superbly - it's been totally reliable. It's been kept under cover and not used through the winter, just the engine run every week.
A whole array of tasteful upgrades including:
Foxeye fairing.
Hel braided brake lines
TCP belly pan
Rear hugger
FZS1000 rear brake caliper upgrade.
Ermax undertray.
Simmi carbon exhaust.
Renthal ultra low handlebars.
Stainless downpipes.
Stainless bleed nipples on all of the brake callipers.
Iridiun plugs
K&N air filter.
New uprated 12mm front sprocket nut.
Brand new Metzler Z6 tyres (done 15 miles)
Fazer tool kit.
The bike has done 16500 miles and will come with 12 months MOT.
The chain and sprockets are in good condition, but I do have a brand new genuine Fazer chain and sprocket set that I can sell with the bike at a bargain price.
Yours for just £1650
Any questions, feel free to message me.
16
« on: 23 December 2013, 11:11:32 am »
FZS600 1999-2001 headlight unit for sale.Very good condition. £50 plus Postage
17
« on: 06 December 2013, 01:31:35 pm »
I've got one.It's in good condition, you can have it for £50 plus postage.
18
« on: 05 December 2013, 03:00:41 pm »
Mines for sale. PM me if you want more details.
19
« on: 30 October 2013, 05:55:57 pm »
No, I've drawn a blank with it at the moment.Devil got back in touch with me and said they had stopped making them and had no parts left.Something will turn up at some point probably when I'm least expecting it that's how it seems to work with these things in my experience,I'm in no rush I'll just wait and see what happens..
20
« on: 09 October 2013, 06:24:39 pm »
I have a carbon end can which I'm going to use so only need the link pipe and bracket,The style of the devil link pipe is what I'm looking for.I've contacted them to see if they sell the link pipe separately.
21
« on: 09 October 2013, 02:50:21 pm »
That's the one.I just want the link pipe and a bracket (which I can make myself if needs be). It'll be interesting to see if the link pipe is available and the cost.
22
« on: 09 October 2013, 11:59:24 am »
I'm thinking of changing my exhaust to high level as a winter project,has anyone attempted this?If so,what link pipe and fixing bracket did you use?
23
« on: 13 September 2013, 12:39:12 pm »
Forgot to add it has a 25mm jack-up kit fitted as well.
24
« on: 09 September 2013, 01:59:53 pm »
Not been out that much this year to be honest. I've had loads on so only really been out on spur of the moment rides once or, if I'm lucky, twice a week.
25
« on: 09 September 2013, 01:31:11 pm »
Harry, I'm in Banbury,North Oxfordshire.
Thanks Red98.
|
Show Posts
