Date: 01-05-24  Time: 14:08 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - old son

Pages: 1 ... 23 24 [25]
601
Fazer 1000/FZ1 corner / Re: Best fix for gen1 forks
« on: 25 June 2012, 09:53:22 pm »
I have fitted R6 forks but you wont like them if you didn't like the R6 rear.

602
For Sale & Wanted / Re: Genuine Yamaha Gen 1 Black Hugger
« on: 24 June 2012, 08:02:37 pm »
Hi, How much do you want for this? Have you got any pictures of the repair required?

603
Fazer 1000/FZ1 corner / Re: Front Side Light Bulbs
« on: 06 June 2012, 09:59:01 pm »
Cheers

604
Fazer 1000/FZ1 corner / Front Side Light Bulbs
« on: 06 June 2012, 07:59:18 pm »
Does anybody know what the reference numbers are for the front side light bulbs. I have a Gen 1 and can confirm they are the push fit type. Thanks

605
For Sale & Wanted / For Sale - 05 Gen 1, only 2300 miles
« on: 23 May 2012, 10:35:50 am »
Blue with silver engine. Mint bike, 2300 miles. Stored in heated garage. Will have new MOT. Currently on SORN. A few subtle extras, Yam belly pan, Ivanised, R1 lever mod, GTR risers. Pm for pictures. £4100 ovno

606
Fazer 1000/FZ1 corner / Re: Front Wheel Bearings
« on: 26 April 2012, 07:08:18 pm »
and thank you Mike for your invaluable help as usual :D

607
Fazer 1000/FZ1 corner / Re: Front Wheel Bearings
« on: 26 April 2012, 03:36:07 pm »
OK, wheel bearings replaced, easy, easy easy!!!! Thing is, the noise I suspected would be noisey wheel bearings (bike has covered nearly 60k miles) is still there  :'(
It must be tyre noise. The front doesn't feel any different. I know it must be because its new.
At least its done now.

608
Fazer 1000/FZ1 corner / Re: Front Wheel Bearings
« on: 18 April 2012, 07:47:47 pm »
Thanks Mike, PM left

609
Fazer 1000/FZ1 corner / Re: Front Wheel Bearings
« on: 18 April 2012, 05:10:26 pm »
Hi Mike, I thought they would be similar to the rears and the guy had to weld a piece on the outer race to give him something to knock out with the drift. Putting the new ones in he used a masive big hammer, if he had missed the bearing he would have broke the wheel in half. lol

I'll dig out the bearings and give it a try. On your head be it!!!!!
 
Thanks Luke. I am going to give it a try.

610
Fazer 1000/FZ1 corner / Front Wheel Bearings
« on: 18 April 2012, 12:16:58 pm »
Is there anybody in SE London/Kent that would be able to replace my front wheel bearings if I delivered the wheel and the bearings?

611
Fazer 1000/FZ1 corner / Re: R6 forks (non USD) for Gen1
« on: 11 March 2012, 10:58:41 am »
and good enough to allow the fazer to perform to somewhere close to its limit. I think you can go over the top, this is not a sports machine and never will be. If you are building for bling thne yes go for it but the R6 front forks are not a bling upgrade, they are a cheap performance enhancement that provides a noticable improvement to the way my bike performs.

612
For Sale & Wanted / Re: Wanted - Riders Foot Rest Rubbers
« on: 02 March 2012, 07:21:23 pm »
Thanks.

613
For Sale & Wanted / Re: Wanted - Riders Foot Rest Rubbers
« on: 01 March 2012, 12:12:36 pm »
Cheers Eddie, now I need a set of rubbers for the rear :lol

614
Fazer 1000/FZ1 corner / Re: R6 forks (non USD) for Gen1
« on: 01 March 2012, 07:57:26 am »
The bike is firmer and more predictable. I have done my best to use up all the travel and I still have 20mm. If you hit road bumps at speed, 40mph and over the bike does tend to fly over them so some fettling will be worthwhile. This is my first efforts at changing springs, oils etc in front forks and now I've done it I would have no problems in doing it again.
I think Kebab will be playing with adjustments on his bike soon but he is lighter than me and his bike was not 25mm higher at the rear in the first place so our settings will be different.

615
For Sale & Wanted / Wanted - Riders Foot Rest Rubbers
« on: 28 February 2012, 07:47:48 am »
Gen 1 Thou, only rubbers required not complete pegs. Thanks

616
Fazer 1000/FZ1 corner / Re: R6 forks (non USD) for Gen1
« on: 27 February 2012, 07:25:48 pm »
Hi, you are correct, I do shop on eBay......sorry.
I have upgraded the forks with Blackbird springs, 0.95kg/mm as suggested by Kebab. I also added 10mml of 7.5W oil to each leg. The existing oil looked fine so I didn't see the point of changing it. Forks had only travelled 7k miles.
I have set preload to two rings, compression and rebound is on standard settings. I have 20mm of travel left after braking hard from 70mph  :b  and riding faster than normal over some very uneven road including pot holes etc.
The bike is already fitted with after market dogbones which raises the rear by about 20mm. The new forks are 25mm shorter than standard.
The bike turns much quicker and appears to follow the turn much tighter than standard forks. I must admit my original forks have travelled 57k miles with two oil changes in that time. I propose to change settings to see if the ride improves but I am already more than happy. I would have paid more for a rebuild than this conversion cost me.
Kebab has been fantastic, thanks mate. I would not have even attempted this without his support. He has sent me numerous emails, links and advice over the past week and I owe him a pint or three.
I will provide an update after I have had a play.

617
Fazer 1000/FZ1 corner / Re: transmission 'clunk'
« on: 24 February 2012, 07:13:29 pm »
I have similar on mine. If the engine is revved in gear you feel like you are dragging something in the engine/gearbox. You also hear a noise that could be described as a clunk. Take it out of gear and its fine. It doesn't seem to have any effect on performance or gear change.

618
For Sale & Wanted / Re: USD R1 yokes (fazer-ised)
« on: 25 January 2012, 06:59:10 pm »
£50 is better !

619
General / Re: Am I liable??
« on: 21 December 2011, 03:32:21 pm »
maybe it stime to have compulsory insurance for cyclists  ?
 
they always claim they R hard done by, they R full road users etc etc  :z ......time they shared in  being insured too...

do not feed the troll...

I agree with him, why shouldn't they have insurance. They cause enough accidents!!

620
For Sale & Wanted / Re: Wanted: FZS1000 2004/2005
« on: 01 December 2011, 08:36:24 pm »
Does it have to have a black engine? I have a very nice 05 with around 2k miles, silver engine. As new.Some nice extras, GTY Risers, R1 gear change mod, new tyres, lower fairing plus some other bits. If you want more information PM me

621
Fazer 1000/FZ1 corner / Re: Gear shifter lever mod
« on: 14 November 2011, 11:25:37 am »
I bent the rod very slightly. No dremel required!

622
Fazer 1000/FZ1 corner / Re: clicking noise
« on: 24 October 2011, 11:50:33 am »
Ear plugs  :b

623
Introduction / Hi
« on: 26 September 2011, 05:55:12 pm »
So what's new? ;)

Pages: 1 ... 23 24 [25]