Date: 01-05-24  Time: 08:46 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - stevegixer

Pages: [1] 2 3 ... 5
1
For Sale & Wanted / right hand fairing infill panel wanted
« on: 14 May 2018, 09:03:34 pm »
As title I need a right hand side fairing infill panel for a 2002 fazer 1000
Cheap as possible.Anybody got one hanging about ?

2
FZ6 / Fazer / Re: 04 fazer6 needs lowering.
« on: 10 May 2017, 05:56:05 am »
Quote from: Grahamm on 10 May 2017, 12:13:47 am
Quote from: stevegixer on 09 May 2017, 07:45:48 pm
As in title a mate just bought a 2004 fazer6 600 & as he is quite short it needs lowering.
It is the model where the shock connects straight to the swingarm .

I have a replacement for the section at the bottom of the shock which is (I think) 25mm shorter than the standard version.

I bought it a few years ago to lower my FZ6, but never got around to fitting it, so I could let you have it if you want.

Drop me a PM if you're interested.
Yes use be interested buddy

3
FZ6 / Fazer / 04 fazer6 needs lowering.
« on: 09 May 2017, 07:45:48 pm »
As in title a mate just bought a 2004 fazer6 600 & as he is quite short it needs lowering.
It is the model where the shock connects straight to the swingarm .

Any ideas info please lads.

4
Fazer 1000/FZ1 corner / Re: FZ1 Rear Shock
« on: 19 August 2016, 02:58:26 pm »
I have a very low milage (4.5k) rear shock cheap .
But you could  contact luke ( devilsyam) for an R6 converted shock.a proven upgrade at a reasonable price.

5
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 08 August 2016, 05:28:39 pm »
Glad they all turned up OK lads  :)

6
Fazer 1000/FZ1 corner / Re: Multi-Gauge
« on: 07 August 2016, 05:39:58 pm »
Quote from: teecee90 on 07 August 2016, 04:40:00 pm

Christian Vieth, the guy who makes them.

http://cvieth.bplaced.net/ganganzeige_summary.html

To place an order just email him: cvieth@vodafone.de

What's the price on them ?

7
Fazer 1000/FZ1 corner / Re: Multi-Gauge
« on: 07 August 2016, 03:45:37 pm »
Quote from: Mick-H on 07 August 2016, 08:41:27 am
Quote from: stevegixer on 06 August 2016, 10:17:38 pm

How much are they ? .................... Can't remember

Where from ? ...................... Christian
Are they easy to wire in ? ...................... Not if you don't know how to do it.

Hope that helps

Sort of helps cheers.but who is christian ?

8
Fazer 1000/FZ1 corner / Re: Multi-Gauge
« on: 06 August 2016, 10:17:38 pm »
How much are they ?
Where from ?
Are they easy to wire in ?

9
Fazer 1000/FZ1 corner / Re: Multi-Gauge
« on: 06 August 2016, 01:21:54 pm »
Quote from: teecee90 on 06 August 2016, 08:31:17 am
Hi


I've ordered one of the multi gauges to replace the fuel gauge. Has anyone who has fitted the gauge used the speedo healer function just to get a more accurate speedo reading with standard gearing? If so, how did you set it up please?

Have you got a link to the multi guages please  :)

10
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 04 August 2016, 08:36:52 pm »
Quote from: teecee90 on 04 August 2016, 08:00:03 pm
Plenty of silicone blanking caps on eBay. Anyone know the internal diameter required for the airbox and carb hose?
Not sure off top of my head but there is a post further back in this thread I think.

11
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 04 August 2016, 06:57:03 pm »
Quote from: teecee90 on 04 August 2016, 01:50:33 pm
Mine arrived today Steve. Looking good. Thanks mate.
Glad you are happy buddy.

12
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 03 August 2016, 09:29:41 pm »
All posted today.
Sorry about the delay lads should be with you by end of the week. :)

13
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 01 August 2016, 11:14:15 am »
Quote from: Tefer on 01 August 2016, 10:54:56 am
Sent Steve, let me know if you get it ok.

Received cheers buddy

14
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 01 August 2016, 06:23:04 am »
Quote from: teecee90 on 31 July 2016, 10:18:08 pm
Steve


Did you get my payment mate? Sent it a couple days ago.


Cheers
Yes buddy received cheers

15
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 31 July 2016, 09:24:42 pm »
Quote from: Peasy on 31 July 2016, 09:19:11 pm
All done mate, thanks
Received cheers buddy need delivery address please

16
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 31 July 2016, 07:58:06 pm »
Quote from: Exupnut on 31 July 2016, 07:49:14 pm
Sent again......(spelt correctly ;-)
Received thanks buddy

17
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 31 July 2016, 07:33:23 pm »
Please recheck PayPal address exupnut as I had mid spelled it sorry

18
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 31 July 2016, 05:44:55 pm »
Didn't post Saturday as didn't receive some delivery addresses.
Red ceri address & payment received
Teecee 90 payment and address received.
Peasy
Exupnut
Refer
I think that's it.need delivery addresses & payment to stevegixer@streetriders.co.UK please lads.
Please send as gift or friends & family

19
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 28 July 2016, 09:48:24 pm »
Sorry for the delay lads.grub screws arrived today.
Will need delivery addresses please so I can try & post them Saturday.
Also payments to stevegixer@streetriders.co.UK £13
Cheers lads.
Redceri payment received cheers buddy.

20
Fazer 1000/FZ1 corner / Re: FZS 1000 end can
« on: 26 July 2016, 12:50:49 pm »
I have an aftermarket can I removed from my thou.not to loud either £50+ post I can sort pics out later if you are interested

21
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 25 July 2016, 10:06:53 am »
Quick update.
All done just waiting for more grubscrews to arrive.

22
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 18 July 2016, 10:09:00 am »
My machinist is on the job lads.hopefully be done this week.I will be in touch  ;)

23
For Sale & Wanted / Re: few more bits and bobs
« on: 10 July 2016, 12:29:06 pm »
Are the disc bolts stainless or standard ?

24
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 07 July 2016, 10:23:05 pm »
Quote from: dazza on 06 July 2016, 04:06:43 pm
Has anyone else had issues with tolerances?  Don't know if I'm doing something wrong but mine seem way to tight a fit and they won't go on any more than you can see in the photo.  Any suggestions?

Sorry about this.if you want to send them back I can get another set made .these were the measurements I was given & personally had no problems.
Obviously I want you to be happy.

25
Fazer 1000/FZ1 corner / Re: AIS removal kit
« on: 04 July 2016, 05:30:04 pm »
Ille get onto the machinist & let you know lads  :)

Pages: [1] 2 3 ... 5