Date: 01-05-24  Time: 02:48 am
« previous next »
Pages: [1]

Author Topic: Windscreen bolts  (Read 858 times)

msewelly

  • DAS Born Again
  • **
  • Posts: 58
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Windscreen bolts
« on: 08 January 2016, 04:40:46 pm »
Trying to change my windscreen over, the bolts just seem to spin, two have come out with ease but the others just spin, they are still holding the windscreen in. Any suggestions
Logged

RMT1983

  • WSB Pack Hound
  • *****
  • Posts: 611
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Windscreen bolts
« Reply #1 on: 08 January 2016, 04:42:57 pm »
inside the rubber on the back of the nose cone there are small nuts, either 6mm or 8mm. with a blade or snips remove the rubber from the old fixings and use a spanner or socket on the nuts to hold it whilst you undue the bolt............. Hope that all makes sense
Logged

msewelly

  • DAS Born Again
  • **
  • Posts: 58
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Windscreen bolts
« Reply #2 on: 08 January 2016, 04:54:28 pm »
Thanks for the reply, under the rubber it appears its round metal ie no bolts. I've tried holding them in place while turning the bolt but it just spins the same
Logged

RMT1983

  • WSB Pack Hound
  • *****
  • Posts: 611
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Windscreen bolts
« Reply #3 on: 08 January 2016, 05:23:46 pm »
Mole grips it is then!!!
Logged
Pages: [1]
« previous next »