Date: 23-10-21  Time: 21:19 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - BBROWN1664

Pages: [1] 2 3 ... 219
General / Re: Trade in & DVLA
« on: 22 October 2021, 09:15:13 pm »
Dealer should have given you the yellow slip from the v5 to show it was with them now so if you get any comeback you can produce that. If you have that, dont worry about it.

General / Re: Whoever posts last is best
« on: 21 October 2021, 11:24:35 am »
After over 2 years, this is still going!!

Fazer 400 and other models / Re: 400 manual
« on: 19 October 2021, 05:11:27 pm »
Sounds like the carbs could need a clean - stick some photos up and we can help guide you through

Fazer 400 and other models / Re: 400 manual
« on: 18 October 2021, 12:14:52 pm »
post some pictures and tell us what the actual issues are , we may be able to help still.

Introduction / Re: Another "newbie"
« on: 18 October 2021, 06:45:01 am »
welcome to the madhouse

Fazer 400 and other models / Re: 400 manual
« on: 15 October 2021, 09:18:38 pm »
I need a Haynes manual or something similar but they just don't seem to exist anywhere for some reason.

The FZS400 was a bike made for the Japanese market and only imported into english speaking countries in small numbers so people like Haynes wont do a manual as the market isnt there to sell the manuals.

IIRC the main difference under the tank between the 400 and the 600 would be the lack of fuel pump. Carbs out should be a similar job on both bike though.

Fazer 400 and other models / Re: 400 manual
« on: 15 October 2021, 04:07:41 pm »
Have you looked in the downloads section of this forum?;cat=7

Fazer 1000/FZ1 corner / Re: Interesting custom Gen1
« on: 04 October 2021, 09:14:05 pm »
Its definitley his old bike.

I cant fix that link either for some reason. If you copy/past the address you can see the video

[Seems the only way to get the link to show and work is to add the following text at the end ' &feature=share ' - bkd]

General / Re: Panic buying pillocks...
« on: 28 September 2021, 05:53:54 pm »

It has also been  suggested  that the reversing parts of the have test could be dispensed with in an attempt to speed up process of getting new drivers "qualified" to drive these leviathans.

More crap media reporting - It has not been dispensed with, they are effectively creating a CBT element whereby the training school has to sign you off on that before you can take your full test.

They are going up in value and it is in great condition but prices are not that high yet. Hope you find a good home for it.

For Sale & Wanted / Re: FOR SALE: Fazer 1000, 2003, 26k - £3000
« on: 24 September 2021, 04:57:30 pm »
as a box of bits its never worth what a complete bike would be worth.

General / Re: Conspicuous by my absence
« on: 24 September 2021, 11:23:04 am »
For clarity - we could definitely do with upgrading what we have currently - we are running low on storage space to the point where we cannot keep backups on line anymore and to download/upload them takes hours. We shouldn't just upgrade the package we have though, someone with more hosting knowledge than me needs to take a good look at the options including how we can migrate the data we have rather than just archive it.

FZS600 Fazer / Re: Mk2 clocks on MK1 fzs600?
« on: 24 September 2021, 11:20:36 am »
so is it possible to fit mk2 clocks to the MK16, fzs 600? Or is it more chew than it’s worth?

Assuming you mean the 2002/3 FZS600 clocks on an 98/99 FZS600 then yes, as Gnasher says, they will fit (and work) with a change to teh connector plug.
If you mean FZ6 clocks on an FZS600 - no they wont work or fit.

FZS600 Fazer / Re: Fitting/Bending Replacement fuel lines
« on: 21 September 2021, 08:01:11 am »
I guess you mean the pipe from the tank to the filter (I used a longer lenght of standard fuel hose to avoid kinks), from the filter to the pump (standard hose will work here) and from the pump to the carbs (standard will work here too).

The biggest issue is kinking the hose when lowering the tank so make sure you dont have any tight bends.

FZS600 Fazer / Re: Replacement Fuel Hose/Fuel Line
« on: 20 September 2021, 09:08:27 pm »
Thanks for the reply! So you just looped in a slightly different position to the original? That might be a reasonable idea.

General / Re: Multi-bike insurance: Feedback -
« on: 20 September 2021, 10:33:17 am »
Based on your experiences do you find multibike insurance  worth having?  I can't help thinking after the first year of taking out a multibike policy there is no way of getting an accurate price comparison against individual bike policies.  I'm presuming the NC discount  can't be used independently for both bikes.   

Depends on the policy you have - some accrue NCD on each bike separately. Others give you the same NCD for both.
After the first year its simple enough though to get two quotes for individual bikes.

FZS600 Fazer / Re: Replacement Fuel Hose/Fuel Line
« on: 19 September 2021, 08:40:27 pm »
I used a similar pipe to you. Just make sure its long enough to compensate.

FZS600 Fazer / Re: Boz Boz Build 2.0
« on: 19 September 2021, 08:39:32 pm »
Coolant foamy and smells when running combined with the running lumpy/cooler on #3&4 I would be looking at the head gasket.
If the coolant wasnt an issue, I would be looking at blocked jets on #3&4

As for the clutch, pop the cover by th eleft foot peg off and see if the rod is in there and not jammed as well as the cable mechanism.

FZS600 Fazer / Re: Carbs
« on: 19 September 2021, 11:50:55 am »
Carbs are the same, all jets sizes are the same.
The main difference is in the float height with the 2000 - 2003 models set to have the fuel level 1mm lower.
The 2002-2003 have a different the pilot screw which is set to 2.5 turns out whereas the 1998 to 2001 are set to 2 turns out.


FZS600 Fazer / Re: Carbs
« on: 18 September 2021, 06:34:28 pm »
Have a look at the yamaha workshop manual in the downloads section for the 100% definitive answer but I believe they are identical apart from the main jet size which is so close, it was probably just changed for manufacturing reasons.

All parts in and complete carbs are interchangeable between the fox and box models.

General / Re: Down the pub - the thread about nothing and everything
« on: 17 September 2021, 08:17:53 pm »
During my GCE (a few years before GCSE's came in) we were forced to use calculators as we didnt have time to do things the long way. CSE students at the time were not allowed calculators and as a result were better at mental maths but did not understand the more complicated stuff.
Logs etc we did, but with a calculator. That said I did learn (forgotten now) how to use a slide rule but that wasnt at school

General / Re: Down the pub - the thread about nothing and everything
« on: 17 September 2021, 01:00:15 pm »
When I was doing A Levels we had access to remote terminals to the Bristol University Prime Mainframe.

My first real job in IT (I did a lot on the side while I was an aircraft engineer) was as a 3rd Party hardware engineer fixing lots of VERY old mainframe, midi and Micro systems including Pr1me systems and other Unix based crap. Never did learn how to drive them properly so always ended up getting the operators to carry out the testing etc unless I had a script to follow. Quickly moved on to Windows servers and desktops as the other engineers were too set in their ways to look at this new technology :pokefun

Here I am 30 years later still wondering if I did the right thing moving out of aero engineering. At least working on the older sh!te I learned to use the keyboard too so even now, to copy/paste or print something etc I use the keyboard shortcuts rather than hunt around working out where the mouse is on the screen etc.

General / Re: Down the pub - the thread about nothing and everything
« on: 17 September 2021, 10:10:03 am »
the one with the big black floppy discs

Quite a modern one by IT standards then

General / Re: Down the pub - the thread about nothing and everything
« on: 17 September 2021, 08:20:32 am »
My first was a Commodore Vic20 followed by the Commodore64 but the first I used would have been an IBM mainframe on the occasions I went to work with my dad.

General / Re: Multiple bike insurance
« on: 15 September 2021, 01:54:06 pm »
Hastings - Their multibike only allows up to 2 bikes

Pages: [1] 2 3 ... 219