Date: 30-04-24  Time: 16:51 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - dorbar10

Pages: [1]
1
Fazer8 / FZ8 / R6 Throttle tube mod - Can't feel any difference
« on: 30 June 2017, 01:37:07 am »
Hi everyone,


I have a 2014 Fazer 8, and I tried to modify it by changing its throttle to an R6 for a shorter WOT.


I ordered Motion Pro 01-0094, tried it, but felt no difference.


So I decided to compare both original tube vs. the Motion Pro (Color White). If you check my attached photos, it seems that they have the exact same diameter?


1. Am I wrong?


2. Which tube can I use to shorten the WOT?


3. Where do I place the black plastic ring? does it go inside the plastic cap grip, or outside it?


Thanks.




2
FZS600 Fazer / FUEL SENDER ASSEMBLY
« on: 05 October 2012, 04:59:53 pm »
Hello, my FZS 600 2002 had a broken fuel sender unit.
I bought a new unit, but when i connect it to the tank the gauge still shows "EMPTY" all the time, even when the tank is fully filled. I removed it from the tank while it was still connected by wire and moved the float unit up and down to see if there is any reaction, and there was.
Outside the tank it works perfectly, but inside it shows empty. My guess is that im doing something worng in the assembly process, anyone got an idea how to fix it? on which direction does the floating unit should point?


thanx.

3
FZS600 Fazer / BEAM HEIGHT ADJUSTMENT FZS600 2002
« on: 14 September 2012, 10:18:18 am »
Hi, how do i adjust the headlight's beam? its way too high and blinds all the drivers..


i found 2 bolts that may have something to do with it, but i see no affect.. :\

4
FZS600 Fazer / help with broken fuel sender + pics
« on: 24 August 2012, 02:50:43 pm »
hello , i have 02 fzs600 with broken fuel sender.. it always shows tank 'EMPTY' and the yellow light is on. I disassembled the sender unit from the tank as shown in the pictures, but it dont know how to fix it, how do i connect the floating unit to the (working) electircal unit?


thank you.


Pages: [1]