Author Topic: FZS600 XENON HID PROJECTOR INSTALL VIDEO (Read 8411 times)

Gav · « **on:** 05 March 2014, 05:56:59 pm »

Finally got around to installing a couple of 2.5" Xenon M328 HID projector units into my '00 Fazer 600. Evenings are getting lighter now, so a bit late but never mind it needed doing!

Here's a video of my install which may be of interest to anybody thinking of doing the same mod:

http://youtu.be/4WHzQHNGmWg

thunderpantz · « **Reply #1 on:** 05 March 2014, 06:11:34 pm »

That looks fantastic mate.... wanna do mine?? :-p

king1 · « **Reply #2 on:** 05 March 2014, 06:57:56 pm »

I have done the other upgrades so far
took shroud off H1 bulb, wired up H4 for dipped and that makes a big difference

the next will be to upgrade the bulbs, when the old ones blow

It is worth checking out all your wiring as I found someone had done a bodge job repairing the electrics before, at least I have all the equipment to do a proper repair and small rewire

I think if I had a newer bike and money I would go for HID

Happy biking and clear roads

Gav · « **Reply #3 on:** 05 March 2014, 07:26:48 pm »

Cheers for the comments dudes. No dodgy wiring here thank you. I did a professional job :-P

MarkWales · « **Reply #4 on:** 05 March 2014, 08:37:46 pm »

Nicely done - do you still have dipped option and high beam option?

Gav · « **Reply #5 on:** 05 March 2014, 08:50:14 pm »

Yeah mate, there is a solenoid inside the unit that actuates a little flap providing full and dipped beam.

para300 · « **Reply #6 on:** 05 March 2014, 09:20:05 pm »

Love the new lights. Probably one of the best light upgrades i've seen. The original lights are shite.

dcurzon · « **Reply #7 on:** 06 March 2014, 10:29:14 am »

What i'd like to see, is a night time shot at around 25feet away from a wall (preferably white wall), so i can see how sharp the cut-off is. Could you do that sometime?
i ask because i'm having projectors fitted at the moment, (not ebay ones, but the ones that the ebay ones are copied from...) and would like to see the quality. I suspect the QC isnt as good (no disrespect meant).
cheers

Gav · « **Reply #8 on:** 09 March 2014, 08:10:09 pm »

Well only had an old curtain not a white brick wall to set and show the dipped cut off. I poked the top of the curtain into the hedge then slapped a bit of masking tape across for my reference line, to adjust the dipped head light cut off to.

Beeblebrox2nd · « **Reply #9 on:** 09 March 2014, 10:43:29 pm »

That looks genius Gav, nice one!
Any chance of letting us know what box of lights you used specifically? Or a link to where they can be purchased?

ChristoT · « **Reply #10 on:** 09 March 2014, 10:46:44 pm »

Anotherone for the mod list! That looks well good!

Gav · « **Reply #11 on:** 10 March 2014, 08:35:11 am »

Quote from: Beeblebrox2nd on 09 March 2014, 10:43:29 pm

That looks genius Gav, nice one!
Any chance of letting us know what box of lights you used specifically? Or a link to where they can be purchased?

Do a search for xenon M328 or here

http://pages.ebay.com/motors/link/?nav=item.view&id=181344039159

Give yourself a weekend to do the job. Or chip away at it over 3 or 4 evenings kind of thing. It's getting the electrics neat and safely installed that takes up half the time.

dcurzon · « **Reply #12 on:** 10 March 2014, 10:51:52 am »

Fella, that cut off is stepped for LHD not uk RHD. The up slope should go to the left
¬¬¬\____

not
____/¬¬¬¬¬¬

Gav · « **Reply #13 on:** 10 March 2014, 08:07:07 pm »

Ok dude will tweak it cheers. Edit.. after checking there was no need to adjust it.

dcurzon · « **Reply #14 on:** 10 March 2014, 09:33:13 pm »

Quote from: Gav on 10 March 2014, 08:07:07 pm

Ok dude will tweak it cheers

could be just the way it looks on the sheet so I'd run it up to garage door or something. It's a bit more than a tweak required, you'd need to strip the projectors out, remove the cut-off plate and basically make another cut-off plate but in reverse and fit one to each projector.

US/Europe etc LHD:

UK/RHD:

you can see how the slope is either up to the right for vehicles that drive on the right, or up to the left for vehicles that drive on the left.

DOT pattern is US/Canada, ECE is for europe

Gav · « **Reply #15 on:** 10 March 2014, 09:45:32 pm »

Pretty sure the flap inside was flat. Will twist the lamp a fraction and also adjust horizontal beam a bit. Well come the MOT I will find out if I need to mod the flaps. Cheers for taking the time to reply with all the pics. Good reference.

dcurzon · « **Reply #16 on:** 10 March 2014, 10:03:52 pm »

No worries, have a look at this page and you can see the disassembled cutoff shield (first image), you'd need to replicate that but reversed
http://www.hidplanet.com/forums/showthread.php?37418-Mini-H1-shield-questions/page3

Gav · « **Reply #17 on:** 27 March 2014, 04:07:14 pm »

I can confirm my Fazer passed MOT with the Xenon HID lights.

YEAH BABY :-)

Gav · « **Reply #18 on:** 29 March 2014, 08:58:40 am »

.

Soz my phone was posting by itself in my pocket. Why is there no DELETE post option on this forum, so I can bin my accidental post? I use tapatalk and have also checked full website version.. No option to remove own posts oh well.

Gav · « **Reply #19 on:** 29 March 2014, 08:59:10 am »

.

apage16 · « **Reply #20 on:** 15 April 2014, 09:02:43 am »

I have to convert mine back to standard!!!!

They pass MOT in the UK, but now I'm here in Germany they WILL fail 100%!! Not fair.

So I'm going back to good old standard headlights.

Luckily they're so good.....

HaVoC · « **Reply #21 on:** 15 April 2014, 10:29:53 pm »

Yeah, but your in Black forest country.... I would give my left nut to live in Germany, great beer, great food, and fantastic roads.... also the beautiful blonde frauleins

So suck it up