This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - ajmes1
1
« on: 10 September 2017, 02:14:53 pm »
Still for sale
2
« on: 15 August 2017, 05:52:26 pm »
For sale is a rear shock upgrade I bought a couple of years back and never got around to fitting, and now I don't have the FZS600 any more, seems pointless keeping it!
Made by Betor, it has adjustable pre-load and compression/rebound through the bottom screw adjustment. That's about all I know and it sat in the shed for 2 years.
£50 ONO + P&P and it's yours.
Located near Selby, N.Yorks for those that may be local (20 miles from Leeds and York).
3
« on: 06 March 2017, 08:24:33 pm »
Bit of a long shot here, but I dropped my fazer in a muddy field on the dragon rally (huge embarrassment there but another story!!) bike came off ok, but the pannier not so much.
Limped home with a bit of duck tape plugging the 3" hole, but before fibre glassing it and making do, I wondered if anyone had an old style e34/36 pannier knocking around that may be surplus or even damaged that I could poach for spares.
4
« on: 31 January 2017, 09:35:31 pm »
Aye, i'll be there  big group of us going over and staying at Llandudno
5
« on: 15 January 2017, 08:44:41 pm »
I paid about £150 a few years ago for mine so £79 would be a bargain, especially as they're quite difficult to come by!
6
« on: 04 January 2017, 06:01:12 pm »
it's not mine, just a listing that I saw. You'd be best contacting the seller on the listing, sorry!
7
« on: 03 January 2017, 05:42:48 pm »
8
« on: 28 December 2016, 05:25:08 pm »
Fitted new sat nav ahead of the dragon rally in February, stripped rear brake ready for some shiny new pads, seals and hoses.
9
« on: 20 March 2016, 08:20:51 pm »
shame I only just saw this, i'm looking to change my 600 in for a bigger tourer!
10
« on: 01 August 2015, 11:34:00 am »
no clamps unfortunately, but you can pick this up fairly easily at most car places. If you want it just send us a PM. James
11
« on: 01 August 2015, 10:23:11 am »
It came off a 51mm aftermarket end can, so will fit any standard 51mm for an FZS600 any year.
Larger end measures 51mm and smaller end measures 48mm.
Unable to get a picture at the mo unfortunately but there are some minor scuffs on the underside of it.
12
« on: 31 July 2015, 06:15:14 pm »
Think i've got a spare stainless one going in ok nick, how would £30 delivered sound?
13
« on: 03 June 2015, 09:29:52 pm »
All sold. Thanks!
14
« on: 12 May 2015, 10:14:22 pm »
Replied punkstig
15
« on: 08 May 2015, 07:20:16 pm »
yup still available.
16
« on: 04 May 2015, 09:40:47 am »
I'll get some ordered up then =]
Just to confirm the studs are M6 thread aren't they? I just took the nuts out of the pack that fitted (they weren't labelled with sizes!!).
17
« on: 04 May 2015, 08:28:27 am »
Meet at squires might be best and take a trundle from there?
18
« on: 03 May 2015, 09:21:51 pm »
good weather on for tomorrow.
Anyone playing out?
19
« on: 03 May 2015, 06:50:49 pm »
I hadn't thought of that, bugger.
I'll be looking to change them before long anyway as they were cheap shitty halfrauds nuts to get me on the road. Rounded three off while I was fitting them (luckily managed to get them off).
Will it be much of an issue?
20
« on: 03 May 2015, 05:03:33 pm »
Standard 600 exhaust system available for anyone that needs bits.
Downpipes are straight off my '02 foxeye, rust in the usual place on the collector box but it's not got any holes and isn't blowing.
End can is the standard 5dm one, a few scratches on the side where it had a minor scuffle with the road.
To you foccers i'd be looking at about £70 for the pipes and £25 for the can. Collection from Selby preferred but courier can be arranged at buyers cost (Myhermes is usually easiest as theres a shop I can drop it off at down the road, and prices are usually fair).
I'll try get some pictures this evening if you need them.
will be going on theifbay on wednesday.
21
« on: 03 May 2015, 04:42:04 pm »
Brill, as I had to pop out i got some stainless nylock nuts to fit instead, but still gave the studs a really good brush.
Sounds and looks amazing!
22
« on: 03 May 2015, 02:39:41 pm »
brill thanks for that, it's on the shopping to list pop and get get now then as only have standard grease!
23
« on: 03 May 2015, 02:25:22 pm »
running the risk of scowls here, but I just managed to get the old downpipes off with not much stress, and only 24 hours of soaking in wilkos rip off wd40.
Is it worth putting some grease on the gaskets and the studs?
24
« on: 03 May 2015, 11:00:16 am »
yeah it's no better here.
Tomorrow is forecast to be better
25
« on: 03 May 2015, 10:59:01 am »
photo of said link pipe: 
|
Show Posts
