Date: 15-04-24  Time: 22:19 pm

Author Topic: rear wheel bearings..  (Read 1791 times)

speirsy1810

  • Cager in Training
  • Posts: 12
    • Main bike:
      FZS 1000 Gen1
    • - main
    • View Profile
rear wheel bearings..
« on: 25 November 2015, 09:19:47 pm »
Hi.......just picking fzs1000 riders brains...i need to get new rear wheel bearings.....where is the best place to get them from...i have no problems fitting them,
ta

esetest

  • GP Hero
  • ******
  • Posts: 1,148
    • Main bike:
      FZS 1000 Gen1
    • - MotoguzziV7racer
    • View Profile
Re: rear wheel bearings..
« Reply #1 on: 25 November 2015, 09:50:25 pm »
I got mine from Wemoto .

AyJay

  • WSB Pack Hound
  • *****
  • Posts: 555
    • Main bike:
      FZS 1000 Gen1
    • - ZZR1400
    • View Profile
Re: rear wheel bearings..
« Reply #2 on: 25 November 2015, 09:55:59 pm »
I got a set from Markman Industrial. Or was it All Balls Racing. If forget.


If a bearing has failed, the roller caged one is a bastard to remove. It kind of welds itself into the aluminium of the wheel. Good luck!

unfazed

  • GP Hero
  • ******
  • Posts: 5,322
  • Never ride faster than your guardian angel can fly
    • Main bike:
      FZS600 02-03
    • - FZS1000 05-06, Serow 2000
    • View Profile
Re: rear wheel bearings..
« Reply #3 on: 25 November 2015, 10:17:22 pm »
The needle roller one does not normally give trouble unless the right side one is totally focced.

Replace the external right seal when replacing that bearing

Marksmans or WeMoto is where I usually get mine if I cannot get them in the local bearing shops

« Last Edit: 25 November 2015, 10:18:55 pm by unfazed »

PaulSmith

  • WSB Pack Hound
  • *****
  • Posts: 541
    • Main bike:
      Other
    • - Versys 1000 2016
    • View Profile
Re: rear wheel bearings..
« Reply #4 on: 26 November 2015, 10:33:28 am »
Marksman does the kit with everything you need. They have changed their website so it is much harder to find, but the kits you want have the codes 'YA001' for the rear wheel bearings and seals and 'YA002' for the sprocket carrier. 
http://shop.marksman-ind.com/ya001-rear-wheel-bearing-kit-fazer-fzs-1000-01-05-yzf-r1-98-01-yzf-r699-02-20-p.asp
http://shop.marksman-ind.com/ya002-fazer-fzs1000-01-05-sprocket-carrier-bearing-kit-22-p.asp


bowen93

  • CBT Wobbler
  • *
  • Posts: 48
  • level of weirdness i can achieve maxed out
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: rear wheel bearings..
« Reply #5 on: 26 November 2015, 11:40:07 am »
i bought the kit from marksman also. good prices way cheaper than yamaha
from the minute your born you are dying, so make the most of it and live life to the max

speirsy1810

  • Cager in Training
  • Posts: 12
    • Main bike:
      FZS 1000 Gen1
    • - main
    • View Profile
Re: rear wheel bearings..
« Reply #6 on: 26 November 2015, 04:16:32 pm »
I got a set from Markman Industrial. Or was it All Balls Racing. If forget.


If a bearing has failed, the roller caged one is a bastard to remove. It kind of welds itself into the aluminium of the wheel. Good luck!




i hope not...but thanks..

speirsy1810

  • Cager in Training
  • Posts: 12
    • Main bike:
      FZS 1000 Gen1
    • - main
    • View Profile
Re: rear wheel bearings..
« Reply #7 on: 26 November 2015, 04:18:17 pm »
thanks for all your assistance....very helpful....

nickodemon

  • GP Hero
  • ******
  • Posts: 1,721
    • Main bike:
      FZS 1000 Gen1
    • - Aprilia tuono V4
    • View Profile
Re: rear wheel bearings..
« Reply #8 on: 27 November 2015, 02:24:55 pm »
+1 Marksman
If it's broken, it's not fixed.