---

So managed to find a well priced r6 tail section, and ordered a new 5MT r6 undertray to mod it with, cant wait to get started on it!!!
One thing is I need to recover the front seat, so has anyon...

---

Hi


looking for some info, i need to check my pick up coil resistance but seem unable to find it in my Haynes. Does any one know what to resistance should be?


many tha...

---

Hi,


hope some one can help, im looking at replacing my CDI unit info on the unit(J4T095 72 5DM-01 2X08) and was looking at second hand units. All the info is the same on other units e...

---

Hey guys ,


So, took the carbs off the Fazer yesterday for pre spring clean and while I had access I thought I would pull the cam chain tensioner to see if there'#039s any steps left (rat...

---

How to adapted from visordown website.

---

Hello again,

as a new FZS owner, I have decided to try the Wurth Dry chain lube. Trouble is there are no useful instructions on it as to when to replenish the application. Does anyone have ...

---

Hi folks I’m new to the site and I have a fazer 600 fox eye I have found out that the headlight are continental light and wondering if there is anyway of adjusting these to suit the uk roads or will I...

---

Now matter how hard I look, them fooking keys allude me .
Why is it when you lose something you go back and check exactly the same place a great number of times, I think I have almost worn the ba...

---

Hello,


Trying to fix my carbs with following set (attached). Question is - where does smallest oring go? I have no idea and it seems impossible to find inside manual (too low resoluti...

---

Hi all,
 nbsp  nbsp  nbsp  nbsp  nbsp Can I share a little story with you.
My son and I have both got FZS600 his girl is a 98 and mine a 99, he recently did an oil change on his with no problems and I ne...

---

Hi,


Any chance someone could post a pic of the correct cable routing for the speedo pick-up please?


Cheers


Andy

---

Alright folks, Im wiring up a Koso speedometer and dont know how to wire it to the ignition as it doesnt have an on/off switch like heated grips for example so cannot be wired directly to the battery....

---

Got a 00 fzs600,all good but upon viewing,rear brake was stiff from sitti up,it hadnt much bite in it and to get some pressure we pumpd the pedal. nbsp BUT TODAY on my careful journey to the garage,i was...

---

Got a 00 fzs600,all good but upon viewing,rear brake was stiff from sitti up,it hadnt much bite in it and to get some pressure we pumpd the pedal. nbsp BUT TODAY on my careful journey to the garage,i was...

---

Hi folks, noticed my fan never comes on, will try running 12v to it make sure its not the fan, but any idea where I'll find the temp sensors? I have a box eye model from '98 cheers

---

I've stuck a race can on my fazer which makes it sound much more fun but its made a big flat spot early in the revs. Anyone know what jets I can use to get rid of this?

---

  my fazey was firing on 3 and i panniced easy fix a tub of vasaleen put it in and on every electrical connector and eath point and this solved mine from missing    run like a dream

---

Hi.
Anyone tried a set of Pilot Powers? I'#039m having a set fitted this afternoon for £235 all in. Before I spend the cash I hoped I get the low down on them. US sites Revilla seems to rate t...

---

This is my generic guide rather than Fazer specific...
http://www.curzonweb.co.uk/2013/10/28/scottoiler-simples/
 

---

Been looking for a luggage rack to carry my rather large kit bag to work. Couldn'#039t find one big enough, so I knocked one up from bits of box section I had lying around.

Renntec run in fea...

---

Right, I'#039m due a rear tyre and am not sure what to get. nbsp I do around 25k/year just commuting so I want something that'#039s going to last a long time but not be stupidly expensive or hard as rock. nbsp An...

---

does anyone no if a yamaha fazer 2003 will have the same size downpipes as a 1999 fazer 600 thanks ps looking at a new end can but the bike he used it 4 was a 2003 bike and mine is same bike but 1999 ...

---

Originally posted by Moffmeister on 31/03/01


For whatever reason the offside light on the Fazer only comes on when it’s on main beam (although it has a H4 dual filament bulb fitted). ...

---

Originally posted by slidesvill on 27/06/04


This seems to be getting a common problem, and I'#039d like some info off the foccers that have lost your front sprocket nut. I conside...

---

Originally posted by kebab19 on 20/09/2008


Short Q&ampA

Q: What'#039s this?

A: This is a front fork modification for Yamaha'#039s FZS600 98-03. It improves...

---

Originally posted by pointer2null on 07/06/2009


Firstly, this is a guide. I accept no responsibility for any mistakes or omissions. If you break it or injure yourself then that...

---

Originally posted by Nooj on 28/02/2009


If you want to fit LED indicators to your FZS600 Fazer, you can get them flashing at the correct rate by wiring a 21w resistor in parall...