Date: 01-03-24  Time: 13:58 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jools

Pages: [1] 2 3
1
For Sale & Wanted / Re: YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 03 September 2016, 10:01:11 am »
Now sold

2
For Sale & Wanted / Re: YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 03 September 2016, 08:09:28 am »
Just had an offer of £270 if someone can better that on hear it can be yours.
but be quick as i will be selling it today.


jools

3
For Sale & Wanted / Re: YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 02 September 2016, 10:15:12 pm »
This is all that you get

4
For Sale & Wanted / Re: YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 02 September 2016, 09:26:15 pm »
hi it has the following
- link pipe? titanium version- connecting springs there are 3- hanging bracket made from carbon- baffle baffle yes- baffle screw and screw
it also has the copper seal for the exhaust
i ll put a photo on her later

jools

5
For Sale & Wanted / Re: YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 01 September 2016, 04:46:58 pm »
Hi all this is the link below for eBay as promise also have a look at my scala rider items


http://www.ebay.co.uk/itm/191959637444?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649


jools

6
For Sale & Wanted / Re: YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 29 August 2016, 08:52:14 pm »
The Akrapovic sticker has been removed as you can see to make it look more O.E.M
it has a lovely sound not too loud  just right.
if your looking at this you know how rare these are.


jools
 

7
For Sale & Wanted / YAMAHA FAZER 1000 Akrapovic TATANUIM EXHAUST
« on: 29 August 2016, 08:20:23 pm »
HI ALL I AM SELLING MY AKRAPOVIC EXHAUST YOU WILL KNOW HOW RARE THESE ARE.
THIS IS A STREET LEGAL EXHAUST AND HAS THE REMOVABLE BAFFLER.
IM LOOKING AROUND THE £280 MARK



8
For Sale & Wanted / Fazer 1000 for sale near swansea south wales
« on: 17 August 2016, 08:57:30 pm »
Hi all but its time to say goodbye to the fazer 1000
as i am only doing 500 miles year on it.


It needs to be used by a new owner.
to use it and not be locked up in the garage.


her is a link for the sale on eBay
http://www.ebay.co.uk/itm/-/191944482150?


its also on gumtree
https://www.gumtree.com/p/cars-vans-motorbikes/yamaha-fazer-1000-exup-2004-in-immaculate-condition-first-to-see-will-buy/1182764489


you will not be disappointed
£3200 ono


jools

9
Fazer 1000/FZ1 corner / Re: Doing a bit of that 'Ivanising' in April
« on: 17 March 2016, 03:35:50 pm »
Hi mike
I have to put a post on her
you did my bike 2 years ago and its still as sweet as it was when i pulled away from your
friends garage in the midlands.


I only had the slip on stage one and everybody on the day had the full monty.
for what i ride the bike it has suited me down to the ground.


The exup valve is still working as when you set it and the carbs are still balanced
i have only done 3k in 2 years on the bike.


i did find an arkrapovic exhaust with a removable baffler like new,it took me a year and a half.


Anybody on her in two minds in getting the mod done, just get it done as it will transform the bike completely
power is smoother mpg is 42-46 if you don't go nuts on your right wrist.
it should have been as yamaha should have made it from the factory.


mikes party trick is having your carbs in his hands in under 20 mins
that you have taken me most of the day.


again many thanks


jools

10
For Sale & Wanted / Re: Fazer 1000 gen 1 gel seat wanted
« on: 08 March 2016, 06:33:42 pm »
that looks a really great seat, is it a gel or just extra foam.
did he give a difference in the piping as i would rather a grey as my bike is grey and black.


I have had a price off him and i have already seen some of his work on some trikes.
as my bike is now 16 years old and the seat does feel hard on long journeys  i think
i am going to get a new seat and tyres and a new R6 rear shock.


did you post it to him or drop it off.


jools

11
For Sale & Wanted / Re: Fazer 1000 gen 1 gel seat wanted
« on: 06 March 2016, 07:51:16 pm »
Hi thanks for the replys how much money are we talking about and how long does it take.


jools

12
For Sale & Wanted / Fazer 1000 gen 1 gel seat wanted
« on: 06 March 2016, 07:29:28 pm »
Hi do you have or know of someone selling a gel seat or a custom seat
as i am after  one or do you know of companies out there doing gel seats.


cheers jools

13
The standard can has a 60mm dia link pipe and most after market exhaust have a 50mm
I think that this has a lot to do with it.
I had a exhaust recently but i sold it because of the robbing the lower end Torque
I have recently had the Ivanising done by mike and this has completely transformed the bike
so i would be looking for a Akrapovich can before long to see if this has resolved the lower end lose of Torque.
Or if you have exhaust PM me for details
jools

14
Fazer 1000/FZ1 corner / Re: Who's getting ivanised this weekend
« on: 16 June 2013, 07:44:15 pm »
Hi all i had my bike done on Saturday. just the slip on with std can BUT OMG
and WAW what a difference it makes :eek .
rode up the midlands 134 mile's and ride home was 160 miles in the rain!
so i had a really good ride, bike is smoother, bike starts much easier, pick up is there from near idle speed. fuel consumption is really great 160 miles on just over 3/4 of a tank of fuel so work that one out :b  but i did not really push it 70- 80mph because of the weather.
If there is anybody thinking of this mod it is a must, and i would not hesitate in doing it BUT get it done professionally.
mike is a really great guy and very professional , his knowledge of the fazer is outstanding and he is a genius in his own right. I would like to thank the host Nic of the venue and the 3 other lads who i met a really nice bunch of lads.
Rich can you PM me for more details on your shock please.
again thank you mike for working on my bike.
jools
 
 

15
Bump
these are finishing tomorrow
if you are interested

16
Hi all just been told that these are the same for the FZS600 98-
I have relisted to sell at a lower price so grab yourself a bargain
links are below.


http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190835282797

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190835290099
 

 
thanks
jools

17
Bump  :D
these are finishing this sunday!
Not to miss out.
Jools

18
I replaced the mirrors and most of the plastics including the fairing
when i did a nut and bolt strip down over the winter.
it make the bike look factory fresh.
As i have done this to all of my bikes.
give me a E-mail for your offer through Ebay.
jools

19
Hi all selling my old mirrors off my bike which as you can see are not bad at all.
they will come in the new box's that i have replaced them with.




These are good used mirrors and are genuine Yamaha items. the new ones cost me £78.30 each
at my local dealer.
Hi all just been told that these are the same for the FZS600 98-
I have relisted to sell at a lower price so grab yourself a bargain
links are below.


http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190835282797

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190835290099
 

 
thanks
jools

20
I think i have seen the yellow peril up in Ystalfera way :lol
If i am right.
jools

21
Fazer 1000/FZ1 corner / Re: rough idle
« on: 22 April 2013, 06:18:49 pm »
try some sea foam fuel treatment, you can buy it on ebay
 
http://www.ebay.co.uk/sch/sis.html?_nkw=Sea%20foam%20Injector%20Cleaner%20Engine%20System%20Carbon%20Cleaner%20UK%20SELLER&_itemId=290772142238

the lads over in the usa love it.
but dont put in too much.
jools

22
Fazer 1000/FZ1 corner / Re: Question About Ivanising
« on: 18 April 2013, 07:40:32 pm »
58 days and 12 hours and counting until i get mike to do his magic :D
cant wait
jools

23
Fazer 1000/FZ1 corner / Re: Mirror to fairing nuts torq settings
« on: 18 April 2013, 01:45:34 pm »
I like that, thats a good one.
6Nm sounds good so far.
any more advances on 6 Nm.
just to let you all know that i will be selling the old genuine ones that come off
before long. which are not to bad just a few light scratches on plastic.
i  am still in putting the bike back to its factory fresh look as i do on all of my
bike previously and yes they all do get used.
jools

24
Fazer 1000/FZ1 corner / Mirror to fairing nuts torq settings
« on: 18 April 2013, 08:39:42 am »
Hi just bought some new mirrors 2 (Genuine) at a cost of £73 each
and just look at my haynes manual and there seams to be no torq
setting for it. does some have an other manual with them.
jools

25
I did not know that you needed washers to change over.
thanks for the info where to get them thats great.
jools
 

Pages: [1] 2 3