Date: 01-03-24  Time: 15:29 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - jeffco

Pages: [1]
For Sale & Wanted / FZS1 04 For Sale
« on: 16 August 2018, 07:20:07 pm »
It is with deep regret that I having to part with my FZS1.

Unfortunately health issues are forcing me to stop riding, so I am selling my 04 FZS1 Silver with Black engine, It has only 24.700 on the clock. I have owned it for 9 years, I have all its MOT's, it is currently MOT'd until 23.6.2019.

As you can see by the list it has had a lot spent on it and If I get the asking price I will leave all the extras on.
There is a small mark on the R/H Fairing, but all in all it is very good condition, I have always had it garaged.

List of Extras

Ivanised By Mike
R6 Rear Shock
Hyperpro Front Springs & Oil change
Renthal Bars
Titax Adjustable levers
Billeted Grips & New Bar Ends
Rear Hugger
Yamaha Belly Pan
Scot Oiler
Fender Extender
R1 Gear Selector Upgrade
Beowulf Rad Guard
Gear Indicator
Seat Re-upholstered by Tony Archer Huddersfield
Rentec Rack also FZS1 Rear Hand Grips
D/B Screen
Sat Nav Power Point
Louder Horn fitted
Braided Brake Lines

FOR SALE £2.300

Fazer 1000/FZ1 corner / help with posting in sales forum
« on: 15 August 2018, 07:19:21 pm »
Hi guys

I have been trying to post my bike on the sales & wanted page, following all obvious instructions plus attatchments from my hard drive but with no success. Help would be appreciated as it is bad enough having to post my bike for sale once never mind having to keep repeating.


Fazer 1000/FZ1 corner / How to load photos
« on: 12 August 2018, 02:07:41 pm »
Hi All

im looking to sell my bike, how do I post photos, help would as ever be appreciated


Fazer 1000/FZ1 corner / ht leads and plug caps
« on: 26 May 2018, 04:57:06 pm »
Can anyone point me in the right direction? problem with the bike misfiring, so looking to change the plugs and leads. 2004 bike still on original set up so a change might sort the problem, checked coils and resistance is fine.

Fazer 1000/FZ1 corner / She wont start
« on: 15 May 2018, 08:30:07 pm »
I would welcome any input on my predicament. I went to go out for a spin last week I had about half a tank of fuel and I added a small amount of redex (about 40ml)  then rode to the local garage 1/2 a mile away  and topped up , it was my  first time out  this year due to being busy, anyhow my 2004 fzs1 started ok as it always has but sounded a bit lumpy  as I backed it out of my garage it stalled then took a few goes to restart I put it down to old fuel in the line and set off to top up. it started ok after I had fuelled up but continued to run a bit ropey, loosing power then picking up again,a couple of miles later the problem got worse then the bike backfired a couple of times and stopped, and stayed stopped  I got rac recovery out to take me home.  when it was trying to start kerbside it sounded like it was only running on 2 cylinders and the exhaust was blueish. I had last started the bike about 6 wks earlier and ran it for 15mins , it was fine
my mate and I stripped out the carbs and cleaned them 2 jets looked to be blocked, the fuel pump looks to be working ok, doesn't look to be the head gasket  ,took the rad cap off  and it seems ok. Not sure which way to head next  without getting a garage to pick it up and start paying :'(

Fazer 1000/FZ1 corner / Exup valve spacer
« on: 08 July 2016, 01:28:00 pm »
Im trying to get a replacement for the spacer that goes on the inside of the exup blade where it goes into the hole at the back, I have just rang my local Yam dealer  £32 + vat...whaaaaaaat!!!! for a spacer!. If you bought all the parts of yam dealers to build a bike it would cost millions.  so if anyone has one to sell or knows a cheaper outlet I would be grateful to hear of it.  The bike starts and runs fine without it, I just don't know if it would do any long term damage to the valve.

Fazer 1000/FZ1 corner / Occasional problem changing gear
« on: 04 August 2015, 08:00:46 pm »
For a while now I seem to have a problem changing down gears if I have brought the bike to a stop without down changing as I slowed, when im stopped and I try to change down it will go down to about 3rd them wont go further without a bit of jiggling about. Other than that the gearbox is fine, no missed/ sticky  gears  and changes down fine if I change down as im slowing. Is this a common problem? or are dark clouds forming on my horizon ?   You can tell that ive just had a week in Scotland , still looking for bloody dark clouds...

For Sale & Wanted / FOR SALE Dreamscreen tall dark tint windscreen
« on: 10 March 2014, 09:32:00 pm »
ANYONE LOOKING FOR A NEW SCREEN. used once, tried it out on Sunday but all round I think ill stick to my Powerbronze D/B. These are on ebay for £60 + £4 p+p....Im looking for £40 including p+p    a bargain.

Fazer 1000/FZ1 corner / Scotland
« on: 05 July 2013, 06:19:14 pm »
Just returned (Wednesday) from 5 days in beautiful Scotland...I say beautiful because I remember it from last time, it was too  cloudy and wet to see much this time. If it wasn't raining it was going to not to mention the gale force winds fu*k me its July. When is Jamie Oliver gonna do Scotland ...deep fried everything,  and to top it off I just about managed to beat my speeding ticket home and find out then that the kilted chappies don't do the "naughty boy class" so its £60 and 3 points................Think I will try August next year  :lol

Fazer 1000/FZ1 corner / Braided Brake Lines
« on: 17 December 2012, 06:32:01 pm »
Being one of this sites more mechanically inept users I am confused by the 2 or 3 front brake line issue and would appreciate some explanation also to change the rear brake or not ? as it seems not everyone does.

Fazer 1000/FZ1 corner / Braided Brake Lines
« on: 17 December 2012, 06:09:59 pm »
As one of the sites more mechanically inept users I am confused by the 2or 3 front brake line subject when changing to Braided hoses....explanations,sugjestions and best/cheapest place to buy would be greatly appreciated.Also is it worth changing the rear or not?

For Sale & Wanted / fzs1 rear shock
« on: 20 August 2012, 07:06:12 pm »
I am considering getting an r6 shock and am feeling out if anyone would be interested in my old one, Ive had it refurbed and a hyperpro spring put in about 3000 miles ago cost of £180  which was a big improvement but am curious about the r6 so.....
Ive seen them on ebay advertised by breakers, out of an 04(same) totally standard no stated mileage for £75-£100

Fazer 1000/FZ1 corner / Exup tale of woe
« on: 07 August 2012, 06:55:20 pm »
Due to me getting the 7g error message I decided to service my exup at the weekend and it looks like ive f*cked it up , when Id fitted it I turned the ignition on,no probs so I went for a ride a few miles down the road the 7g error comes up again , went home stripped it down and refit a couple of times to no avail.
When its all fitted it rotates so far then tightens up and on inspection when I held a straight edge to it its got a slight bevel from the back side bending up. I went to the Yam dealers in Chorley and spoke to a mechanic he told me if its bent its goosed throw it away,then said my best option was to throw it away take the cables of and seal the hole with a bolt,job done. I said as far as I was aware this would have an averse effect on the bikes performance he shrugged and said my options were all expensive.
Rang another dealer just to price a new valve £282+ vat   Shit !  Any advice or better still reasonably priced spare valves would be most welcome

Fazer 1000/FZ1 corner / Bar Risers
« on: 27 May 2012, 09:35:35 pm »
Could one of you gents tell me the hight of the standard bar risers,after trying and failing several times to get a screen that im happy with f*ckwit that I am ive just came to the conclusion that the previous owner may have fitter higher risers :o

Fazer 1000/FZ1 corner / SEAT
« on: 17 October 2011, 08:30:16 pm »
Just google Tony Archer Huddersfield ;)

Fazer 1000/FZ1 corner / Shoei Quest
« on: 01 October 2011, 07:00:46 pm »
Hi All
I have just bought a Shoei Quest lid a few weeks ago,I had a Raid2 which fit me realy well but was noisy.After reading so many reviews saying the quest was 60% quieter I got one,it definatly feels more aerodynamic,but 60 % quieter its not! :\

Pages: [1]