Date: 15-06-24  Time: 11:11 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - FazThou

Pages: [1] 2 3 ... 5
1
Fazer 1000/FZ1 corner / Re: New Battery Time
« on: 23 May 2024, 04:56:01 pm »
Hey there, I was just wondering how this battery lasted?


Mickey
Sorry for late reply.....Battery was fine until my bike got written off in january this year (2024)I have used Tanya batteries many times and have never had a problem with them and great next day delivery

2
Fazer 1000/FZ1 corner / New Battery Time
« on: 15 October 2022, 07:46:41 pm »
Just wanted to put this out there for anyone else wanting a new battery....
My one finally died (been on the bike for about 6/7 years so not done bad)
So i looked online and found Tanya batteries, and ordered a new YT14B-BS thursday evening and it was delivered friday lunchtime
Excellent service and cheaper than Halfords who couldnt deliver until next week.

3
FZS600 Fazer / Re: Clutch Problem - FZS600 1998
« on: 25 July 2022, 04:19:02 pm »
Have a read through this post it might help you
Replacing selector forks and drum (foc-u.co.uk)


Cant believe its $300 for the selector.........is it a platinum one lol

4
FZS600 Fazer / Re: throttle sticking
« on: 13 July 2022, 08:34:00 pm »
Are they routed correctly ?
Does the throttle feel free on the bars ?

5
Fazer 1000/FZ1 corner / Re: Guess its about time for a bit of tlc
« on: 13 July 2022, 03:07:48 pm »
Guess i must be lucky then as this one fitted nice and snuggly and no leaks at all  :lol


still got to balance the carbs but bit too hot to be stuck in the garage at the moment


Running well though

6
FZS600 Fazer / Re: Carb clean
« on: 12 July 2022, 04:32:04 pm »
Did mine and once all back together and primed it started up traight away  :lol


The kit i bought had new float needle valves which meant i had to reset the float heights
Going by the manual i turned them upside down and got a measurement of 12.5-13.5mm from carb body to top of float
Been using it the last two days and is alot better
Could do with checking the carbs for balancing but will prob do that the weekend

7
Fazer 1000/FZ1 corner / Guess its about time for a bit of tlc
« on: 08 July 2022, 02:43:51 pm »
Well the old girl is 19yrs old and due its yearly service (by me)
So i thought i would get a carb rebuild kit including diaphragms and give the carbs a thorough clean up
New oil and filter and spark plugs and fuel filter

8
FZS600 Fazer / Re: Slow return to idle after closing the throttle
« on: 08 July 2022, 02:39:36 pm »
Another great piece of advice
Well done unfazed

9
General / Re: back in black...
« on: 30 June 2022, 08:34:05 pm »
...and i still cant post pics properly... :thumbup
:lol :lol :lol :lol :lol :lol :lol
Its ok if your laying down :)

10
General / Re: what did you do with your fazer today ?
« on: 30 June 2022, 08:33:03 pm »
Used daily through the friggin blackwall tunnel grrrrrr!!!!!
Hopefully get a job this side of the water soon  :rolleyes

11
FZS600 Fazer / Re: Carb clean
« on: 30 June 2022, 08:29:05 pm »
I just ordered these for mine along with new oil and filter and new spark plugs so hoping to give the old girl a bit of a freshen up very soon
4 X Yamaha FZS1000 FZ1 2001-2005 Carb Carburettor Repair Kit + Diaphragm | eBay

12
Fazer 1000/FZ1 corner / Re: Valve clearance check time
« on: 24 June 2022, 07:21:12 pm »
Well i had a few spare hours today so decided to check them anyway
Removed the seat tank and sidepanels
Drained coolant and removed radiator and thermostat housing
Removed AIS system then coils and plug leads
Removed rocker cover and all clearances are well within spec  :lol  happy days


Put it all back together and refilled coolant


Next job is to check and balance the carbs, possibly sunday






13
Fazer 1000/FZ1 corner / Re: Valve clearance check time
« on: 18 June 2022, 05:21:19 pm »
Exactly what i was planning to do PieEater
Just ride and enjoy it :)
Gonna give it an oil and filter change possibly next weekend if i remember to order them in time lol

14
Fazer 1000/FZ1 corner / Re: Valve clearance check time
« on: 18 June 2022, 12:04:07 pm »
Flew through the mot this morning so back using it for work
There is no signs or noises from the head so am going to leave the valve clearances until it is laid up in the wet season :D



15
General / Re: what did you do with your fazer today ?
« on: 17 June 2022, 08:16:19 pm »
Sounds like you had a good trip mate

16
General / Re: Paint disaster
« on: 15 June 2022, 05:36:42 pm »
Doh !!!


Hopefully some warm soapy water will get it clean for you

17
General / Re: The FOC-U Bike Picture Challenge
« on: 15 June 2022, 05:34:01 pm »
Fine.

New challenge:

Your bike and a set of traffic lights


Any particular colour  :lol :lol :lol

18
Fazer 1000/FZ1 corner / Re: Valve clearance check time
« on: 14 June 2022, 05:27:19 pm »
Well this has been put back till next weekend as just found out the mot ran out last week oops lol
Anyway booked in for saturday so will get that done first then start...
Maybe doing a bit more while im there and will post up pics as i go  :D

19
General / Re: The FOC-U Bike Picture Challenge
« on: 14 June 2022, 05:25:03 pm »
Looks like you will have to do this one Grahamm then set another easier challenge like "Your bike parked next to a lamp post"  :lol :lol :lol :lol

20
Fazer 1000/FZ1 corner / Re: Valve clearance check time
« on: 13 June 2022, 05:21:01 pm »
Cheers for all the info and advice guys.
Am fairly competant as have rebuilt a few r1's in the past
BUT everyday is a school day  :lol

21
Fazer 1000/FZ1 corner / Re: Valve clearance check time
« on: 09 June 2022, 05:38:26 pm »
Cheers PieEater for the tips


22
General / Re: what did you do with your fazer today ?
« on: 08 June 2022, 07:54:10 pm »
Not alot dearer than over here robbo !!!!


The light had just come on on mine so i filled her up and it costs £30.32
2 years ago i could fill t up for £16 ffs

23
Fazer 1000/FZ1 corner / Valve clearance check time
« on: 08 June 2022, 07:48:56 pm »
Well my old 2003 fazer 1000 has just crept over 24500 miles so i suppose i will have to check the valve clearances very soon (not bad for an old girl )


Anything you guys/girls can suggest i get before i start ?


Once i have done them i will have to re balance the carbs i presume ?




24
General / Re: So What're You Listening To Today?
« on: 03 June 2022, 01:14:58 pm »
Today, I have listened to a symphony.
Called Black Widow, its in several movements, from the introduction through various pieces, i.e. 4,000 & 6,000. I think the composer is Yamaha. The best bit (I think) was the overrun, followed by the give it the berries.  :lol :lol


 :lol :lol :lol :lol :lol :lol :lol

25
FZ6 / Fazer / Re: FZ6 Engine
« on: 27 May 2022, 11:51:40 am »
There are a few on ebay

Pages: [1] 2 3 ... 5