OK so i am in the middle of a project to re-wire the headlight loom to fit my DB-01r Plus....
I have to fit new speed sensor and magnets
I have to fit the in-line RPM sensor
Biggest headache is am going to cut the connector off the current loom ( spare off ebay ) and crimp the connectors on for the new speedo AMP connector to plug it all neatly in..
Then i have to shorten the headlight wires etc...
So what i thought was simple is a little more drawn out..
First off - what is the gauge, model no
Also you will have to at some point join the speedo onto the new headlight loom or splice wires in or join them in some other way and thus it will carry the old switched live and ground i assume?