Date: 17-05-24  Time: 19:43 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - justy1

Pages: [1]
1
FZ6 / Fazer / 1000 rear caliper on a 600
« on: 30 August 2013, 08:00:09 pm »

ive read somewhere you can put a 1000 gen1 rear caliper on the 600 (boxeye/foxeye). ive managed to get hold of one.

now i sort of remember someone saying it needs to be filed down a touch so it fit. anyone done this mod on here? if so what exactly do you have to do?
ive not got the bike to hand at the mo to compare or see what i might have to do.

any help would be great.

thanks



justy1000

2
Fazer 1000/FZ1 corner / ignition cut off relay
« on: 14 August 2013, 06:52:31 pm »
is there an ignition cut off relay on the 2002 gen1??

ive look in the haynes manual & theres no ref to one in it so i googled it & nothing comes up on that either.

if it has, where is it located on the bike & what dose it look like?




justy1000

3
FZS600 Fazer / rear wheel bearings
« on: 21 June 2013, 05:15:49 pm »
been told the rear wheel bearings need changing at some point.

any recommendations on what ones are best/most popular? bikes a T reg mk1.


many thanks



justy1000

4
FZS600 Fazer / engine bars
« on: 24 April 2013, 04:49:03 pm »
looking to put engine crash bars on my bike. bikes a mk1 box eye.

ive seen 2 makes of bars which i like the look of & they are the renntec & heed.

anyone got either glued to their bike?



justy1000

5
FZS600 Fazer / bt 020 tyres.......
« on: 15 April 2013, 07:33:19 pm »
bt 020's for the mk1 fazer 600.............

can you still get um? went to tyre fitter & he said that Bridgestone dont make um anymore???

is this true?

cheers


justy1000

6
FZS600 Fazer / engine casing
« on: 09 January 2013, 01:03:43 pm »
afternoon.

had an off just before christmas in which i required screwing back together. ( if ya interested the x-rays are in the "picture challenge bit" in the general section )  ;)

anyways, i finally got to see the bike today & see what state its in. i knew one of the casing was cracked as there was oil all over the road. i thought it was the clutch cover but it turns out it wasnt. it was the one in front which sticks out. ( ive not really taken much notice of how the engine looked ) :\

my question is, what that casing called? ive tried googling it & ebay as i need to replace it but ive no joy in indentifing what its called. i would of looked it up in my haines manual but ive seemed to of hiden it somewhere. :o

anyone know what its called?

sorry, the bikes a black 98 ( t reg ) 600.

many thanks


justy1000

7
General / posting pics on ere
« on: 07 January 2013, 09:14:48 pm »
i know this question maybe ask quite alot but how the f*ck do you stick pics on ere!!!???

im gathering you either need to have a bloody degree or be stephen bloody hawkins to do this? im not very good with pooter so could any tell me how to do it? ( in thicko terms would be great )

cheers


justy1000

8
General / bet you watch this more than once!
« on: 03 December 2012, 09:02:35 pm »
fake or not, made me chuckle........

only a fazer rider would do summit like this! :rollin



Police Pull Over Motorbike FAIL





justy1000

9
Fazer 1000/FZ1 corner / engine cutting out...
« on: 05 October 2012, 11:28:14 am »
gen1 52 plate 29000 miles on clock....
 
couple of things.....
 
the engine keeps cutting out! it only use to happen when i was over taking now it dose it while im doing low speed & while im waiting at lights/junctions! the bike also feels like its being pulled back like its hesitating (if that makes any sense?)
 
it also struggles starting when its on the side stand. i have to sit on the bike & sit it up straight for it to start.
 
any ideas on what it maybe?
 
 
justy1000

10
FZS600 Fazer / headers
« on: 30 August 2012, 04:02:17 pm »

can anyone suggest a good company who sale cheapish stainless headers?

many thanks


justy1000

11
FZS600 Fazer / side stand
« on: 01 July 2012, 02:58:09 pm »
question.

i have a 98 (T reg) fazer 600, the side stand on that has to be lifted up with the foot before pulling away. now, my dad has a W reg fazer 600 & as soon as you lift the bike up the side stand whips up by itself! when you put it down you have to keep your foot on it. bit of a f*cker to remember when you forget!

is it meant to do that?  oh forgot to mention, his also has a clock & hazard light button where as mine dont. ( im guessing mines one of the first gen1's of the fazer 600 world)




justy1000

12
Fazer 1000/FZ1 corner / AIS kit
« on: 15 March 2012, 08:06:45 pm »
Unfortunately thats it. Ive none left & sadly I wont be making any more.  :o


 So, not trying to be/sound rude, but can forum members who are after um stop sending me PMs/emails.

That said, I'd like to say thank you to all those who have purchased not just the kits but also other bits Ive "knocked up" in the past.



justy1000

13
Fazer 1000/FZ1 corner / multi-gauge
« on: 09 March 2012, 12:51:59 pm »
has anyone fitted the latest version of the multi-gauge? (the V8 model)

just that ive finally got round to wiring mine up & abit confused. reading the instructions, it says if i want to use the build-on speedo-healer i need to solder the resistor along with the orange wire then make a cut in the circuit..........

do you have to solder these on or not? any help will be great.


many thanks


justy1000

14
Messages for Users / thats it!
« on: 27 February 2012, 10:43:30 am »
i know i dont use this site much as i spend more time lurking about on the other side but thought id let you all know.

as of friday (24th feb) it was my last day at work (redundancy) so i wont be making anymore bits. :-(

so, id like to say thanks to those who did purchased bits i did make.



justy1000

15
For Sale & Wanted / AIS kits all gone!
« on: 06 November 2011, 04:11:40 pm »
just to let you all know all the kits are now gone! i have none left & i dealt ill be making anymore.

so id like to say thank you all those who did buy a kit & that the mod goes well.

if any who have bought a kit & has already fitted it would it be possible to post some feed back good or bad as ive not heard anything. some say that it means it all worked out if you dont hear anything but it would be nice to hear from anyone & what they think.

thanks again



justy1000

16
For Sale & Wanted / AIS update
« on: 14 October 2011, 11:31:21 am »
right the rest of the stuff has turned up.

so, all in all ive got "6" complete kits for sale. so if ya interested, jump over to the fazer 1000 forum ave a look on the for sale section under AIS kit (complete) for details & then mge me if ya wonna kit?

oh to make it easier for me, would it be possible to use the fazer 1000 forum, dont wonna keep jumping between forums & missing anybody out.

many thanks


justy1000



17
For Sale & Wanted / AIS kits
« on: 11 October 2011, 11:13:41 pm »
3 kits left

18
For Sale & Wanted / AIS kits
« on: 11 October 2011, 05:27:34 pm »
just to let ya all know ive got 5 complete kits for sale at the mo. ive posted in the for sale section over on the fazer 1000 site.

so please dont post anything on here as i want mange it all on 1 site. i dont wonna keep flicking between 2 sites!


justy1000

19
Fazer 1000/FZ1 corner / AIS update
« on: 11 October 2011, 05:25:36 pm »
just to let ya all know ive got 5 complete kits for sale at the mo. ive posted in the for sale section over on the fazer 1000 site.

so please dont post anything on here as i want mange it all on 1 site. i dont wonna keep flicking between 2 sites!


justy1000

20
Fazer 1000/FZ1 corner / AIS caps
« on: 08 October 2011, 02:03:38 pm »
finally!!!!!!!!!!!!!!

dont know whats wrong with ya login register bit but its taken me an "hour" to get it sorted. was registered but every time i tried to login it wouldnt let me! 

right, previous user name was justy1000 & was in the middle of making some AIS caps up.

cut along story short, what turned out to be just making the 4 caps has turned into making up a complete kit. thats the 4 main caps & the 2 airbox caps.

cant seem to post pics so to make it easier for me jump on over to the fazer 1000 forum & have a look at the tech & mod sec under " prototype AIS caps" to get an idea of what theyre like.

just 1 draw back, i will be making a limited number (try to make as many as i can) as im due for an op on thursday which will take me out of action for at least 2 months.

i will be posting them in the for sale section on the fazer 1000 forum (so keep an eye out) to make it easier for me to manage & i dont miss anyone out due to watching 2 forums.....



Pages: [1]