Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Jbizzle on 21 October 2020, 11:11:10 pm

Title: R1 Clocks Switch - Electrical help
Post by: Jbizzle on 21 October 2020, 11:11:10 pm

Can anyone with a bit of electrical know how give me a hand with this?


I'm trying to switch the clocks on my 2000 plate FZS600 with a R1 (5JJ) clocks.


I have the R1 front end on the bike, having the corresponding speed sensor / clocks seemed like a good idea at the time :rollin


I'm struggling with working out what's what, on the R1 terminal from the wiring diagram.


Perhaps I am going about it the wrong way?

Title: Re: R1 Clocks Switch - Electrical help
Post by: Disorderlypunk on 22 October 2020, 04:00:25 pm

if you ever get it sorted and working right please let us know cause it seems like a nice little upgrade

Title: Re: R1 Clocks Switch - Electrical help
Post by: kebab19 on 22 October 2020, 05:44:08 pm

Is it the same as the early FZ1/FZS1000 sensor running from the front sprocket?  If so, why not just run it to the original clocks as forum member Muddybuddy did?

http://foc-u.co.uk/index.php/topic,14254.msg162228.html#msg162228 (http://foc-u.co.uk/index.php/topic,14254.msg162228.html#msg162228)

Title: Re: R1 Clocks Switch - Electrical help
Post by: Jbizzle on 27 October 2020, 08:15:05 am

Hi Kebab.


I could do but i kind of want the challenge of getting these to work.


I will document it all in case it does come off then anyone else who wants to give it a bash has an initial leg up.


Does anyone know if i can actually narrow down each wire in the loom using the wiring diagram?


Cheers,


James

Title: Re: R1 Clocks Switch - Electrical help
Post by: ben on 28 October 2020, 06:55:54 pm

Are you trying to connect the R1 main harness to the Fazer? Or are you trying to connect the Fazer wiring to the R1 instrment panel?

Title: Re: R1 Clocks Switch - Electrical help
Post by: Jbizzle on 29 October 2020, 11:58:36 am

Hi ben,


I am trying to connect the R1 instrument panel, to the Fazer main harness.


The bike is a FZS600 2000 (5DM). With the normal loom etc.


But the Clocks/ instrument panel are off the R1 (5JJ).


So I will be using the connector for the R1 instrument panel, from an R1 front loom that I purchased. Then cutting off the wires at the  at the loom end, then matching up each of the wires function,  with the Fazer wires by colour.

Title: Re: R1 Clocks Switch - Electrical help
Post by: Disorderlypunk on 29 October 2020, 02:14:54 pm

have a look at
http://www.robcollingridge.com/kitcar/design/engine/clocks.html (http://www.robcollingridge.com/kitcar/design/engine/clocks.html)
might be a bit of help to figure some of it out

Title: Re: R1 Clocks Switch - Electrical help
Post by: ben on 29 October 2020, 03:13:09 pm

I've attached an update to your spreadsheet. This shows (I hope/think) what wires from the R1 are going into the instrument cluster. I guess the next step find the equivalent wires on the Fazer wiring diagram.

Title: Re: R1 Clocks Switch - Electrical help
Post by: Jbizzle on 29 October 2020, 04:54:53 pm

Quote from: ben on 29 October 2020, 03:13:09 pm

I've attached an update to your spreadsheet. This shows (I hope/think) what wires from the R1 are going into the instrument cluster. I guess the next step find the equivalent wires on the Fazer wiring diagram.

Ben, mate you're a legend.


I will give it a crack in the next month or so.