1
General / today's riding
« on: 28 January 2017, 04:32:24 pm »
first day in the spring festival, riding with my friends. almost full?
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
General / today's riding« on: 28 January 2017, 04:32:24 pm »
first day in the spring festival, riding with my friends. almost full?
2
Fazer 400 and other models / what kind of headlight bubles fazer use?« on: 28 December 2016, 01:06:32 am »
Hello! anyone know what kind of headlight bubles fazer use? I've notice that a H4 light is not suitable for it.
3
Fazer 400 and other models / Anyone use Shell roletta T5 before? how dose it works?« on: 18 August 2016, 03:18:26 am »
I'm using repsol rider now and going to switch to roletta T5 next oil change, is it ok? since it's alot cheaper than the repsol.
4
General / Chain noise loud, Is it time for the replacement of this sprocket set?« on: 30 March 2016, 07:51:51 am »5
Fazer 400 and other models / using a car oil filter for fazer400« on: 22 February 2016, 03:28:50 am »
Can't find a suitable cycle filter for my fazer, now I'm using a HONDA Accord car oil filter on it, will it be a problem? the oil pressure or the filting abilitty?
7
Fazer 400 and other models / clutch slip problem« on: 31 January 2016, 11:24:21 am »
Hey guys, My fazer 400 clutch slips a little when I pull the machine to high rpm, the engine roar but the speed raise up slowly. I don't know what cause the problem, i have check the clutch disc, but it is Ok for use. only a little black color on one of the steel disc. And I have check the clutch spring, I don't know if it's pressure is still OK for working, will it be the springs pressure problem cause slip? don't wanna waste extra money to buy parts before I find out what cause the slip. Guys give me some tips, thank you very much.
8
Introduction / hi all« on: 21 January 2016, 07:42:34 am »
I'm 29 from Asia, I bought my naked mod fazer400 no long ago( sorry for my poor english ). This bike is a little bit old, but the enginne is still good, the machine idle speed is very stable, and it start very easy. There is only 2 problems on it, first, it's cluch will slip when you try switch gears in a high rpm. The second problem is the 3rd Carbs had leaking of fuel several days ago, but it recover after I clean the carb, and I don't know when will leaking again, so I add a fuel filter to the fuel hose. This is a black bike, I take this photo at night, so it's a little bit dark.
before that, I already have 2 suzuki and a yamaha. 9
Fazer 400 and other models / Do I need to start the enginne 1 time a week?« on: 20 January 2016, 08:25:32 am »
hello, it's a little bit cold outside here, won't be ride my fazer400 for several weeks, do I need to start the enginne and let it idle running for mins once a week to prevent the machine freeze?
10
Fazer 400 and other models / Is Top1 semi synthetic oil(20w50) suitable for Fzs400?« on: 19 January 2016, 07:20:03 am »
Hey guys, I'm using top1 semi synthetic oil (20w50) in my 1997 Fzs400 just bought 2 weeks ago, but I don't know if this oil suit for my bike. Do I need to use fully synthetic oil instead?
Pages: [1]
|