Due to change the spark plugs on my Gen 1 very soon, had a look at Pats motorcycle page forra few tips, cylinders 2 and 3 look to be a bit awkward to get at, any tips or advice off folks on here?, considering taking off radiator for easier access or is this not needed?, I'm not the most mechanically minded person in the world so any advice is appreciated.
No need to take off the radiator , I would remove the tank rather than prop it , there is not a lot of room to get to the middle plugs but it's doable , use the spark plug spanner in the tool kit under the seat . , rather than a wrench with a load of extension bars .Quote from: ullukk on 22 March 2014, 02:19:03 pmDue to change the spark plugs on my Gen 1 very soon, had a look at Pats motorcycle page forra few tips, cylinders 2 and 3 look to be a bit awkward to get at, any tips or advice off folks on here?, considering taking off radiator for easier access or is this not needed?, I'm not the most mechanically minded person in the world so any advice is appreciated.[/quote[size=78%]][/size][/size][/size][size=78%]Cheers mate, thanks for tip.[/size]