This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - FILZ6
26
« on: 19 November 2020, 09:58:41 am »
 Hahaha 😂. Good post that, nice to have something that brings a smile to your face these days.  .
27
« on: 05 November 2020, 07:15:30 pm »
+1 Fuel, great quality, nice sound, good looks. 
28
« on: 09 September 2020, 03:59:01 pm »
Measure the inside diameter, and the cross section, then look on e bay for that size “o” ring. You may have to buy 10, that’s more than you need but far cheaper than carb kits. Look out for ethanol resistant material.
I have done it this way on a cbr600 and a bandit 1200 pilot jets in the past.
Hope this helps.
29
« on: 04 August 2020, 06:06:51 pm »
Wemoto.com are showing the seals in stock, £5.62 + £3.00 postage to the UK. Looks like the collar is out of stock though.
30
« on: 04 August 2020, 04:51:49 pm »
Try Wemoto, or Yambits.
31
« on: 15 May 2020, 08:56:20 pm »
No problem. I hope everything goes well. Stay safe.
32
« on: 15 May 2020, 08:22:56 pm »
I remembered we’re I read it. It is on Bennett’s insurance website.
Some BMW dealers workshops are open for service/ repairs for key workers, so you might be able to get it serviced.
On some models, the first/ run in service interval has been stretched from 600 miles to 1200.
33
« on: 15 May 2020, 07:28:13 pm »
VNA-BMW Wank.
I have read somewhere recently that most manufacturers including BMW have extended their bike service intervals and warranty periods, because of the issues the corona virus is causing.
34
« on: 10 May 2020, 02:16:01 pm »
Page 2 loads when not logged in. But won’t load when logged in, strange. 
35
« on: 07 May 2020, 05:35:33 pm »
Yeah standard length bolts. When you fit crash bungs you get longer bolts with them, well you do if you fit Yamaha ones. Yeah Bolt diameter, not the Hexagon head size. Off memory, I don’t think the nuts are captive.
36
« on: 07 May 2020, 12:37:23 pm »
Hello. Original engine mount bolts Gen1 Fazer 1000. 1x 10 mm bolt 110mm long. 2x 10mm bolt 115mm long. 1x 8mm bolt 115mm long. All measurements taken from under bolt head. Hope this helps.
37
« on: 27 April 2020, 09:47:25 am »
Hello. As promised photo's of Pazzo Levers, for you to have a look at.
Cheers.
38
« on: 22 November 2019, 07:32:37 pm »
Hello. Thundercat clutch pressure plate is the same part number on Fowler’s website. So is another option to search for a used one from breaker/ e bay maybe. Good luck.
39
« on: 25 October 2019, 05:06:03 pm »
Hi Agricola. Yeah that’s the type I was looking at getting. A local paint shop has them on e bay for £10.50. So going to get one and use it solely for acf50. Thank you very much for your input, much appreciated. Cheers mate. 
40
« on: 24 October 2019, 08:45:11 pm »
Hi Agricola. Totally agree with you about that useless trigger bottle that is supplied with acf50, I have tried different types/makes of atomiser bottles, all useless. I am interested to know, if you don’t mind me picking your brain. What type of spray gun do you use? Would it be like a small paint spray gun? I have seen on e bay a HVLP mini spray gun 0.8mm. For £10.50. Is that the type of thing you use? Or could you point me in the right direction please if not. Cheers mate.
41
« on: 22 October 2019, 07:42:26 pm »
Hello old son. Bank transfer ok with me. If your happy with that. I will pm my details to you, and you can give me your address etc. Cheers.
PM sent.
42
« on: 22 October 2019, 12:23:48 pm »
Genuine OEM Yamaha Disc Pads, New, Have never been fitted.
They fit "Fazer" Bikes with Blue Spot Type Calipers. FZS1000, FZS600, FZ6 S2, FZ1. (Fazers). They will fit other models in the Yamaha range. Please check first.
I bought them as spares for my FZS1000, but unfortunately have had to sell it, so these are now surplus to requirements. £45 inc uk postage.
Can collect if you prefer, Teesside area.
43
« on: 11 September 2019, 08:31:15 pm »
Ok. Never mind. Thank you for the prompt reply anyway.
44
« on: 11 September 2019, 07:50:20 pm »
Hello everyone.
Am I missing something?
I do not seem able to add/attach a photo to a personal message. If this feature is available to use, Please could somebody explain to me how.
I appreciate any help offered with this.
Thanks in advance.
Phil.
45
« on: 11 September 2019, 06:16:11 pm »
Undertray Sold.
46
« on: 11 September 2019, 04:40:34 pm »
Stew53uk. PM sent.
Phil.
47
« on: 10 September 2019, 03:11:23 pm »
Hello Ian.
Hopefully you can see the mounting position for the tail tidy in attached photo's.
Regards.
Phil.
48
« on: 10 September 2019, 02:43:38 pm »
Hello Ian.
Found the undertray, I have included some photo's of it, if you want more let me know.
it has been lurking in my garage for years, it is obviously "not new" but it is unused, never been fitted. Unfortunately I do not know who the manufacturer was.
I have no packaging, fitting instructions etc. I think it should be easy enough to work out how to fit it.
Any more info you want, if your interested in it and it is what your looking for just shout up and I will reply asap.
Cheers.
Regards.
Phil.
49
« on: 09 September 2019, 06:37:45 pm »
Hello Ian. I think I still have one in my garage. It is unused but in no packaging. I will dig it out tomorrow and send you some photos of it. Have a look, see what you think of it and let me know if it is what you are looking for.
Regards.
Phil.
50
« on: 26 August 2019, 07:35:06 pm »
Hello silly Simon. I think there is a full set of indicators for sale on foc-u Facebook page. Might be worth a look if your still searching for some.
|
Show Posts
