Date: 21-05-24  Time: 16:42 pm
« previous next »
Pages: [1]

Author Topic: Swingarm play....  (Read 1363 times)

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Swingarm play....
« on: 29 August 2016, 11:33:40 pm »
So, other post details issues with rear wheel bearings...


Have the swingarm off as well and have noted some play in the Swingarm Bolt/Swingarm Spacer pair...

The Swingarm bearings themselves are fine, no movement from them...

The manual states 1mm of play side to side and up and down at the Axel end of the Swingarm is ok..

A video says a 1000 words, so uploading now...


Comments?, i am not sure if i need to address this, my FZS600 has no side to side play.


I also not sure IF i do need to, then do i replace the Bolt, or the Spacer, or both?


Anutz
« Last Edit: 29 August 2016, 11:37:24 pm by anutz »
Logged

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Swingarm play....
« Reply #1 on: 29 August 2016, 11:43:50 pm »



Is this nothing or something?
« Last Edit: 29 August 2016, 11:45:26 pm by anutz »
Logged

Fazerider

  • GP Hero
  • ******
  • Posts: 2,214
    • Main bike:
      FZS600 98-99
    • View Profile
Re: Swingarm play....
« Reply #2 on: 30 August 2016, 08:46:19 am »
It's nothing. The bolt and sleeve aren't intended to be an interference fit. Once the bolt is torqued up the frame is securely clamped to the sleeve/inner bearing.
Logged

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Swingarm play....
« Reply #3 on: 30 August 2016, 08:53:44 am »
OK cool....one less thing to worry about
Logged
Pages: [1]
« previous next »