Fazer Gen 1 Hand guards ?

[wessiedave]

Has anyone fitted BMW / KTM type handguards to their Fazer? I've heard V Strom ones fit but I'd like clarification if poss, any ideas, Thanks Dave

[fazer69]

the v strom ones fit with  a bit of trimming, if you look on the old site ive put some pictures on there last year.

[tomlinscote]

yep i can confirm the v-strom ones workm i have them on mine and over winter they were a god-send even had to turn off the heated grips some days and i have the crappest circulation!!!
 

[phil on a fazer]

if you go down the V-strom route i think you need to get the ones off the 650, pretty sure the 1000 are different.

[tomlinscote]

I used the 650 ones but had to make a little extender, see other post for a much neater job than i did!!

[fazer69]

i got mine off ebay, alfordsfolk @ £48.95, theres sum on there now

[tomlinscote]

That's what I paid for them from a suzuki dealer (Crescent in Southampton)

[GrahamB]

I fitted KTM ones last year. Needed a bit of trimming to clear brake reservoir & standard clutch lever rubbed a bit. Got shorty levers now so wouldn't be a problem. Had to pack them out a bit with silicon hose where they bolt to bars. Looked okay but didn't think they suited the bike so took 'em off.

[justy1]

got ktm ones on mine. fitted on ok.



justy1000

[wessiedave]

Thanks everyone for your info , I have a Givi touring screen so might suffer more with fouling ! I'll have a better look later and try and decide if it will be a major issue, thanks, Dave

[tomlinscote]

I have a givi screen too and cant say it has caused any problems re fouling etc
 

[wessiedave]

Thanks for that last comment too, I'll have a look on ebay and other suggested sites and get buying, cheers, Dave 

[wessiedave]

OK, got the vstrom 650 guards and fitting a doddle (heatgun on right guard reqd) but i can only just use the steering lock cos they fowl on the mirrors! I have seen somewhere on here a question regards mirror spacers but can't find it now  can anyone help?  Ta, Dave

[kebab19]

Fuzzyone mirror mod worked for me

[ghostbiker]

kebab have you tried the hand guards WITH the fuzzy mod? i want to add hand guards at some point when funds allow but although the guards clear with normal mirrors i think the fuzzy mod would lower them into the line of the guards at lock.
havent tried it just was looking yesterday at how close my oxford muffs get to the fuzzy mod

[wessiedave]

No idea what the fuzzy mod is but I'll have a search on here in a minute , thanks

[kebab19]

Yes my mirrors have been modded, slight fouling only between Left-Hand-Side handguard and screen

This is with Renthal 758 bars fitted, 10mm trimmed off both ends

If you want I can take pics of 'bars at full lock either side?

[ghostbiker]

thx kebab, with the amount of time bars actualy use full lock a slight touch isnt a problem. it just suddenly hit me the other day that the fuzzy mod lowers the mirrors slightly so might make a diff.
i WILL get round to doing the guards one day lol. its on a long list of todo