Ok, i've just been told it is a viewable video, so Packie you're gonna have to tell your bosses to upgrade your Commodore PC
These are the lights i bought
http://www.ebay.co.uk/itm/Amber-LED-Stick-On-Indicator-Turn-Signal-Strips-For-Yamaha-FZS-600-S-Fazer-/180967760572?pt=UK_Motorcycle_Parts&hash=item2a2284e2bcHad to undo the indicator to slip the wire inside the fairing, then the stripped back wire was put through inside of the bullet connector of the original indicator cable, folded back a bit then pushed back in. Be careful stripping the wire back as the cable is
very thin.
The positive/negative wires do have to be the right way round too, otherwise they don't work, as i found out!
I positioned the LED strip just before the curve at the front of the fairing to keep it from being bent at all, as i figured when/if the weather gets hot the heat may melt the double-sided tape and undo it.
*** The advert says you will need resistors to keep the lights in sync with the original indicators,
you do NOT need them, they sync just fine ***
I put them on just as an extra warning for when you poke the front of the bike out from a side turning, and to be honest i never thought they'd be that bright but it appears to be a small amount of money well spent