Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: markrg on 02 January 2012, 01:14:15 pm

Title: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: markrg on 02 January 2012, 01:14:15 pm

Can anyone please advise on a tail tidy made for the Fazer 1000, I have searched on the web but not finding much at the moment. Thanks.

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: devilsyam on 02 January 2012, 01:41:38 pm

prymid plastics and skid marx do them but the only one i recall thet dosn't need the inner guard hacking up is Tcp

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: markrg on 09 January 2012, 09:31:15 pm

Thanks, I am looking at this one. 

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: GrahamB on 10 January 2012, 11:03:33 am

I am also looking out for one. TCP one looks perfect but $270.00 is coming out at £175.00 before carriage which is a bit steep for me.  :(

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: markrg on 14 January 2012, 06:14:16 pm

I agree, its more than I planned to spend. Its worth looking at www.holeshot.com (http://www.holeshot.com) they have an undertray that looks good and retails for $109 (excluding delivery).  I am still looking as I was hoping to find an easier fix than a replacement undertray. 

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: Ghoti on 14 January 2012, 06:33:55 pm

Mark,

I am a ham fisted idiot and, apart from putting the tip-over switch on up-side-down, I managed to change the undertray easily.

I put the new undertray (2nd hand on eBay) beside the bike and when I took a screw out of the old one put it in the new one so I knew where it went. After I got the old tray out I swapped the screws over and as Haynes says 'fitting is the reversal of removal'.

With a trip for a new number plate (and look at bikes) and a panic because of the tip over switch, I managed it in an afternoon.

Would be cheaper if you can find an undertray on ebay.

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: markrg on 15 January 2012, 11:12:22 pm

Ghoti, Thanks for the advice..........I may just try myself.

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: devilsyam on 16 January 2012, 01:23:49 pm

black one on ebay now http://www.ebay.co.uk/itm/YAMAHA-FZS-1000-FAZER-UNDER-TRAY-/170765137903?pt=UK_Motorcycle_Parts&hash=item27c26537ef (http://www.ebay.co.uk/itm/YAMAHA-FZS-1000-FAZER-UNDER-TRAY-/170765137903?pt=UK_Motorcycle_Parts&hash=item27c26537ef)

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: GrahamB on 16 January 2012, 03:47:31 pm

cheers for ebay link. I'm bidding.  :)

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: devilsyam on 16 January 2012, 03:52:19 pm

here's another http://www.ebay.co.uk/itm/YAMAHA-FZS1000-FZS-1000-FAZER-5LV-2002-BLUE-REAR-UNDERTRAY-INDICATORS-ASSEMBLY-/190625646467?pt=UK_Motorcycle_Parts&hash=item2c622c8783 (http://www.ebay.co.uk/itm/YAMAHA-FZS1000-FZS-1000-FAZER-5LV-2002-BLUE-REAR-UNDERTRAY-INDICATORS-ASSEMBLY-/190625646467?pt=UK_Motorcycle_Parts&hash=item2c622c8783)

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: Ghoti on 16 January 2012, 04:08:46 pm

Looking at those pictures, I can now see why my old undertray was cut where it was.  I only had from the battery holder to about the seat catch and then a non-yamaha bit of plastic covering the back bit (like the black bit of the second ebay link posted by Devilsyam).

May have to give it a clean up and see what it really is.

Title: Re: Gen 1 Fazer 1000 2005 Tail Tidy
Post by: GrahamB on 16 January 2012, 11:12:33 pm

My tray is cut from left to right in about the same place as you describe Ghoti. I have filled the void with windscreen glue for now. Fingers crossed I will win the black one on ebay & have to pull it all off!  :rolleyes :)