Date: 29-03-24  Time: 12:04 pm

Author Topic: FZ1 rear suspension: Linkage parts  (Read 1763 times)

b1k3rdude

  • Foc-u Helpful Foccer
  • Global Moderator
  • GP Hero
  • *****
  • Posts: 2,404
    • Main bike:
      FZ1 Faired Gen2
    • - GSF 1250
    • View Profile
FZ1 rear suspension: Linkage parts
« on: 06 December 2021, 02:52:50 pm »
Can anyone tell me bolt and nut sizes for the wishbones are? because both my local dealer/s and Fowlers don't know or cant tell me.

« Last Edit: 06 December 2021, 02:54:18 pm by b1k3rdude »

Gnasher

  • Foc-u Brake Doctor
  • GP Hero
  • ******
  • Posts: 5,601
    • Main bike:
      FZS600 98-99
    • - ZX10R, XJR1300, X10, GSF1000GT
    • View Profile
Re: FZ1 rear suspension: Linkage parts
« Reply #1 on: 06 December 2021, 03:06:24 pm »
Off the top of my head M10 course with 14mm bolt head, nuts will also be 14mm nut.  The nuts will more than likely have a lower flange to them, as will possibly the bolt head.
Later

b1k3rdude

  • Foc-u Helpful Foccer
  • Global Moderator
  • GP Hero
  • *****
  • Posts: 2,404
    • Main bike:
      FZ1 Faired Gen2
    • - GSF 1250
    • View Profile
Re: FZ1 rear suspension: Linkage parts
« Reply #2 on: 06 December 2021, 04:19:16 pm »
M10 course
So that 1.25 thread pitch?

Decoke Dave

  • Weekend Warrior
  • ***
  • Posts: 203
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: FZ1 rear suspension: Linkage parts
« Reply #3 on: 06 December 2021, 05:30:07 pm »
 Yes. All the M10 bolts (and M12 for that matter) are 1.25mm pitch on our bikes. You should use the same tensile strength of bolt. This is marked on the bolt head but the Japanese designate this differently from Europe!  Just to complicate matters! 😥
« Last Edit: 07 December 2021, 08:40:22 am by Decoke Dave »
If at first you don't succeed, pull your foreskin ower yer heid!

Dudeofrude

  • GP Hero
  • ******
  • Posts: 2,345
  • Rude, Crude and Tattooed
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: FZ1 rear suspension: Linkage parts
« Reply #4 on: 09 December 2021, 09:05:09 am »
Any idea on the part numbers for those? As I've still got some used genuine nut and bolt sat here that I'm certain we're from when I swapped my linkages out. part numbers 90105-10323, 95607-10200 and 90105-10030. They're used but have been resealed in the bag
« Last Edit: 09 December 2021, 09:07:16 am by Dudeofrude »

Dudeofrude

  • GP Hero
  • ******
  • Posts: 2,345
  • Rude, Crude and Tattooed
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: FZ1 rear suspension: Linkage parts
« Reply #5 on: 09 December 2021, 09:06:32 am »
Any idea on the part numbers for those? As I've still got used genuine nuts and bolts sat here that I'm certain we're from when I swapped my linkages out. part numbers 90105-10323, 95607-10200 and 90105-10030. They're used but have been resealed in the bag
« Last Edit: 09 December 2021, 09:07:52 am by Dudeofrude »

b1k3rdude

  • Foc-u Helpful Foccer
  • Global Moderator
  • GP Hero
  • *****
  • Posts: 2,404
    • Main bike:
      FZ1 Faired Gen2
    • - GSF 1250
    • View Profile
Re: FZ1 rear suspension: Linkage parts
« Reply #6 on: 09 December 2021, 09:56:19 am »
Part numbers match up (3x 95607-10200, 2x 90105-10030 & 1x 90105-10323), you have a PM.
« Last Edit: 09 December 2021, 09:58:36 am by b1k3rdude »