Date: 24-07-21  Time: 15:51 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Iceman

Pages: [1]
1
For Sale & Wanted / Re: 99 Fazer 600
« on: 30 October 2019, 09:02:25 pm »
SOLD

2
For Sale & Wanted / 99 Fazer 600
« on: 29 October 2019, 06:05:42 pm »

FZS600 - registered 17/06/99


My wife's bike, bought in 2006.  Not been used at all much in last few years.
MOT history back to 2004, MOT'd a few weeks ago - no advisories.
Owners manual and service booklet, however all our servicing done by me.
Standard bike with the exception of FUEL silencer, screen, scottoiler, back rack and top box (42l)
It's an excellent bike, never failed to start and runs like a dream.
Chain and sprockets are good as are the tyres. Motobatt battery.
Still on the original downpipes and showing their age. Paint flaking of the front of the engine.  The fuel gauge is inaccurate at times.
There are a few minor scratches on the tank.£850
Based in Pembrokeshire, SW Wales

3
Photo attached at last!

4
FZS600 / Re: FZS600 - speedo cable routing
« on: 14 May 2016, 01:12:50 pm »
Hi Dave48,


Thanks very much, it's as I thought, but wanted to make sure! Oh and sorry for lobbing it on the wrong forum, not sure what happened there...


Andy

5
FZS600 / FZS600 - speedo cable routing
« on: 06 May 2016, 10:43:06 am »
Hi,


Any chance someone could post a pic of the correct cable routing for the speedo pick-up please?


Cheers


Andy

6
Unbranded touring screen, 14.5 inches tall, smoke grey and MRA X-creen Sport deflector.  The X-creen is boxed with instructions and all the fittings.  Both are like new and have had very little use - £70 posted.

Andy

7
For Sale & Wanted / Re: Fzs1000 2003
« on: 16 April 2016, 10:25:03 pm »
In my view it's well priced, my 04 very low miles machine has just gone for £3400, to a friend, if that helps at all.  I'd give Gumtree a whirl, but suggest you don't undersell for at least another month.  I had a hell of a job tracking down a decent bike (like yours) this time last year and missed 3 in a row!  Good luck.

8
Hi Fireblake,


It varies, but usually between 170-400miles, each way; a few times a month.


Anyway the bike was sold today, no interest from this site and a few enquiries from Gumtree, but ended up going to a friend.  The bike now lives just down the road in St Davids, so at least I can keep tabs on it!  :)


Andy

9
Red, a '99 on a T plate.  And thanks Robbo, hope you enjoy your bike.

10
Thanks for your support Downey and Noggy.  I'd like to see it go to a forum member if poss, I'll still be on here though as we have an early 600.  I'll keep an eye out for your TRX Noggy!


Forgot to mention Haynes manual included and pick up from the local railway station (Haverfordwest) isn't a problem.


Andy

11
Some of you may remember this bike came up for sale in Glasgow last year, courtesy of big bluebear on behalf of his neighbour who had it from new.  I managed to secure the bike, but only after paying a bit more than the advertised price(!), and have done 1200 miles or so since then.  Long story short, I do quite a lot of long distance commuting and had hoped the bike would fit the bill, however it's lack of protection (even with an aftermarket screen) means it doesn't.  So, reluctantly, it's up for sale with an asking price of £3550.  Relevant details are as follows:


2004 "54" plate
Storm Silver, black engine/frame/swinging arm
2 owners from new
3929 miles (bike not in use so mileage won't change)
Datatagged
Yamaha OE crash bungs
Ivan's slip-on carb modification
Puig hugger (brand new)
Otherwise standard
2 keys, owners manual, service handbook and datatag bumf present
EXUP valve overhauled and Avon Storm STs fitted on purchase @ 2781 miles
Engine service and carbs balanced @ 3200 miles
MOT due 22 Jul 16


As you can see from the pictures the bike is in outstanding condition.  The previous owner must have had shares in Waxoyl as most metal parts have had a coating at some time or other so it's been well preserved!  The bike is in Pembrokeshire, South West Wales.


If anyone is interested please PM me with your contact details and thanks for looking.


Andy




12
For Sale & Wanted / Re: FZ1 or FZS 1000 Wanted
« on: 18 March 2016, 02:51:56 pm »
Hi Spoons,


Please check your personal messages, I might have a machine of interest to you.


Andy

13
Fazer 1000/FZ1 corner / Re: Gen 1 Hugger Advice
« on: 07 September 2015, 09:36:13 pm »
Many thanks again; got one on order.


Nice looking machine!

14
Fazer 1000/FZ1 corner / Re: Gen 1 Hugger Advice
« on: 04 September 2015, 08:39:34 am »
Many thanks, I agree it's a smart looking bit of kit.

15
Fazer 1000/FZ1 corner / Gen 1 Hugger Advice
« on: 03 September 2015, 11:28:10 am »
Hi,


Can anyone tell me which manufacturer makes the best quality/fitting rear hugger - Puig/Skidmarx/Pyramid, etc? I'm after a black one.


Thanks

16
Fazer 1000/FZ1 corner / Re: Insecure Inlet Stub Spigot
« on: 30 August 2015, 07:38:08 pm »
Much appreciated.


TPS adjusted (10k rev counter indication initially) and carbs balanced.


Thanks again.

17
Fazer 1000/FZ1 corner / Insecure Inlet Stub Spigot
« on: 29 August 2015, 05:31:22 pm »
I've just carried out the Ivan's slip-on modification to my 2004 bike and all went well; the only hold-ups being whilst I tracked down a decent pin vice and then a T20 torx security bit to adjust the throttle position sensor.


However (there's always a however), the AIS vacuum hose connected to No. 4 inlet stub spigot didn't want to budge and in the process of removal, the inlet stub itself partially withdrew from the inlet stub.  It was clearly stuck in with something so does anyone have a advice on a suitable adhesive?  It's not the tightest of fits so definitely needs some sealant/adhesive.


Also I wondered if it's normal to need to adjust the TPS post mod?


Oh and I now have a decent pin vice and homemade plastic guide for checking the float heights (well worth the effort) if anyone in the parish (Pembrokeshire) is thinking of doing a DIY Ivan's.


BTW many thanks to Mike and Pat for their excellent instructions.

18
Hi Q


The bike is sold, I bought it with a great deal of help from BBB due to a reluctant and rather fickle seller. Good luck with your search.


Andy

19
Hi Mr Bigbluebear,

Sent you a message.

Andy

Pages: [1]