Date: 23-04-24  Time: 13:22 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - neilr

Pages: [1]
1
FZS600 Fazer / Engine stalls when put in gear
« on: 02 December 2021, 10:11:29 am »
Hi


I have yet another problem with my yamaha fazer fzs 600 2003. The bike is stalling every time I put it in gear, first of all I suspected an electrical fault so I tested both the side stand switch and the clutch switch all working ok.
I have tried adjusting the clutch cable but this appears to have done nothing? Finally I put the bike in gear and check the back wheel to confirm it was in gear then I pulled the clutch lever assuming the rear wheel would now turn freely(bike on  stands). Bang! The bike appears to still be in gear with the lever pulled, I've adjusted the cable both way but still no joy. Finally the question would you suspect the cable to be stretched and so doing nothing or something else?


Thanks

2
FZS600 Fazer / yamaha fazer fzs 600 2003 Rev counter not working
« on: 27 November 2021, 03:27:39 pm »
Hi


My 2003 fazer fzs 600 rev counter has stopped working, prior to this my speedo was fluctuating between 0-20mph when stationary. I've checked the usual connections but seem unable to find the problem, I'm not sure if the speedo issue is related to the same fault but seem strange that the rev counter stopped after the speedo issue.
Any help would be greatly appreciated as I'm :groan [size=78%] scratching my head with this problem.[/size]

3
FZS600 Fazer / Yamaha fazer fzs 600 2003 model ignition switch/lockset
« on: 21 October 2021, 02:57:36 pm »
Hi


Any one know of someone selling a ignition switch for my fzs 600 2003. Searched ebay no joy[size=78%], if anyone knows of a main dealer thats selling one more than happy to pay for new to get my old girl back on the road.[/size]

4
General / Yamaha fazer fzs 600 2003 model update
« on: 11 August 2021, 08:28:27 am »
Ignition Switch Yamaha FZS 600 Fazer 1998-2001Hi following on from my last post purchased one of these for my fazer fzs600 2003 model and tried to fit it, unfortunately the connectors are the wrong way round. Male connectors on the main plug and male connectors on the loom plug! I have tried connecting using link wire but am having issues with the wiring colours and where they go. Is there anyone who has use one of these earlier lock switch and fitted it to there foxeye and if so could you give me some pointers as to where they go(wire to wire)

5
For Sale & Wanted / Yamaha fazer fzs 600 2003 model
« on: 26 July 2021, 12:00:16 pm »
Hi
[size=78%]looking for a ignition switch for a fazer 600 2003 model hopefully some one can help[/size]

6
General / Yamaha fazer fzs 600 2003 model
« on: 26 July 2021, 10:56:48 am »
Hi


Tall order i think but I'm looking for a ignition switch for my 2003 Fazer(old on is shot!) I'm starting to believe these are reared then hens teeth. the wiring configuration for the 2003 has 7 wires but the earlier models only have 6 the only difference i can see is a feed to the alarm unit which the earlier fazers were not fitted with.
Can some one with more knowledge tell me if it is possible to fit a earlier switch or where i can aquire a 2003 model switch.


many thanks in advance for your help :'(

7
FZS600 Fazer / Yamaha fazer fzs 600 cuts out when clutch lever is released.
« on: 24 February 2021, 03:09:31 pm »

Hi
I have a yamaha fazer fzs 600 on a 03 plate, seems to have developed an electrical fault. The bike will only start when the clutch lever is pulled in and when released it cuts out straight away.
Second when running if put in gear it instantly cuts out, i suspect both fault are related. Any help would same me a major headache.


Thanks in advance.

8
FZS600 Fazer / yamaha fazer fzs 600 pick up coil
« on: 14 February 2021, 12:41:14 pm »
Hi


just check my pick up coils as ive no spark at the plugs, my meter is reading just over 197 ohms between pins on the pick up loom. does anyone know if this reading is within specification as I cant seem to find any specs and my Haynes does not have it either. Also what output should the pickup be sending to the tci(pulse i believe its called)


Thanks

9
FZS600 / yamaha fazer fzs 600 2003 pick up coil resistance
« on: 13 February 2021, 03:15:42 pm »
Hi


looking for some info, i need to check my pick up coil resistance but seem unable to find it in my Haynes. Does any one know what to resistance should be?


many thanks in advance.

10
FZS600 / No spark at plug
« on: 07 February 2021, 09:35:39 pm »

[/size]Hi i  have no spark at the plug and have carried out the below checks:[/color]
[/size][/color]
[/size]no spark with plug removed and ground to engine body, plug cap resistance taken all within the correct ranges.[/color][/size]Primary and secondary reading taken from both coils again within correct ranges.12v being supplied to the coils when engine is turned over but no spark at the plug?(12v feed at primary connectors)TPS wires belled back to plug at the CDI/TDI all clearany suggestion what to test next[/color]

11
FZS600 / 2003 igniter control unit(CDI)
« on: 07 February 2021, 03:15:16 pm »
Hi,


hope some one can help, im looking at replacing my CDI unit info on the unit(J4T095 72 5DM-01 2X08) and was looking at second hand units. All the info is the same on other units except the last four digit(on my unit 2X08). My question is are any of the other units interchangable ie: 2000 model to a 2003 or 1998 to a 2003.
I cant seem to find and info to say they are or are not. :'(


thanks in advance

12
FZS600 Fazer / Bench sync yamaha fazer 600 carbs(2003 Model)
« on: 09 December 2020, 01:11:20 pm »
Hi


I have a yamaha fazer fzs 600(2003) i have removed stripped and cleaned my carbs. I have read the you can bench sync your carb to get them into the rough ball park before being more precise when fitted to the bike. The information I'm looking for relates to the base carb, I'm :'( [size=78%] at a loss as to which on is the base carb, any help would be fantastic.[/size]

13
General / what is the difference between a fazer 600 99/00 ignition switch and a 2003 mode
« on: 05 April 2018, 08:52:36 am »
Hi everyone newbie here,


Not sure if this is the right place to post so apologies in advance. I have a 2003 fazer fzs 600 and my ignition swith has been attacked by some undesirables! Long story short I can insert the key but have to wiggle and twist before it will turn and I get my dash lights, unfortunately with the engine running I can now remove the key from the ignition switch!( some what dangerous).


My question is I have been looking at the earlier model of the fazer 600's fzs ignition switch and they only have 6 wires where as my model the 03 version has 7. Looking at the wiring diagrams it appears that on the later models the addition wire(Brown) independently feeds the fuse? Can anyone please tell me are the earlier model ignition switches interchangeable with the later models or am I going to have to take out a mortgage to by a genuine part as the later model switchs are impossible to get hold of second hand.


Please any help would be greatly appreciated.

Pages: [1]