Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: WayneUK on 08 April 2020, 10:21:18 am

Title: Chain Case Cover
Post by: WayneUK on 08 April 2020, 10:21:18 am

Hi all,
Just wanted to know the best way of removing the chain case cover to get to the front sprocket?

Title: Re: Chain Case Cover
Post by: robbo on 08 April 2020, 10:48:33 am

You'll have to remove the gearchange linkage first, then the sprocket cover. One end of the linkage is left hand thread. Make a note of how much thread is used as you dismantle, so that the gear lever can be returned to its current position.

Title: Re: Chain Case Cover
Post by: WayneUK on 08 April 2020, 10:58:13 am

Quote from: robbo on 08 April 2020, 10:48:33 am

You'll have to remove the gearchange linkage first, then the sprocket cover. One end of the linkage is left hand thread. Make a note of how much thread is used as you dismantle, so that the gear lever can be returned to its current position.

This is the bit i wasn't sure about removing, which end is the left had thread? and what will be the best way of removing gearchange linkage?

Title: Re: Chain Case Cover
Post by: red98 on 08 April 2020, 11:02:27 am

hi wayne...remove the foot rest and linkage in one piece,disconect the linkage from the gearbox end...three hex bolts hold the footrest to the frame...

Title: Re: Chain Case Cover
Post by: WayneUK on 08 April 2020, 11:19:26 am

Quote from: red98 on 08 April 2020, 11:02:27 am

hi wayne...remove the foot rest and linkage in one piece,disconect the linkage from the gearbox end...three hex bolts hold the footrest to the frame...

Hi red,
That sounds a good way, I'll give that a try , Thank you