well done Nick,it seems the next chapter of your life is starting, good luck mate
Got it off the back of the van this morning with no dramas. My method of packing it in the van worked well - put a large, inflated airbed at the front of the van, put the bike hard up against it, then another airbed, then piled all the heavy boxes, furniture etc against that so nothing was moving All parked up, locked up and covered safe and secure now
How are the roads looking so far & what's the hedge density?
The most important item packed in carefully and everything else Focced in Did you at any stage forget you were driving a van and go to overtake like you would on the bike? Glad to see you got "Home" safe and sound
if your coming up norf at any point next season gimme a shout, I know where the best hedges are
put a large, inflated airbed at the front of the van, put the bike hard up against it, then another airbed, then piled all the heavy boxes, furniture etc against that so nothing was moving
My comfort seat came today,got it off e/bay for £100 a bit expensive but it's mint and looks ace,where do you post pics and find smileys etc?
Took it to the local friendly mechanic to get the master cylinder screws removed.Started with a punch and hammer but that didn't work so moved on to the drill.Drilled the heads off removed one screw but the other snapped clean off when going at it with vice grips.So the welder came out. :twisted: Blob of weld was enough to remove it with the grips.Finally out.I think the threads have been damaged on the left hole the new screw in that hole feels tight. Some unavoidable damage has been done to the cap but it was that or a new MC.
Quote from: CaptainCazador on 26 November 2015, 07:30:09 pmTook it to the local friendly mechanic to get the master cylinder screws removed.Started with a punch and hammer but that didn't work so moved on to the drill.Drilled the heads off removed one screw but the other snapped clean off when going at it with vice grips.So the welder came out. :twisted: Blob of weld was enough to remove it with the grips.Finally out.I think the threads have been damaged on the left hole the new screw in that hole feels tight. Some unavoidable damage has been done to the cap but it was that or a new MC.Never heard of Left Hand drill bits then