On the original headlight the bulbs are the "male connectors".
speedo replacement advice ---if you see the cheap chinese copy of the koso clocks steer clear - i have one and it looks ok and speedo worksbut rev counter is a bit slow and the fuel guage wont work i have full and one bar less than fullgo the extra mile and buy the proper koso it will last longer comes with better instalation instructions and has all the settings you will ever needthe wiring is actually fairly simple once your in there just have a good look at the wiring diagram for a 12v that goes into the clocks then feeds down to the speedo sensor make sure that wire down has 12v feed to it to get it to workyou could use the magnet sensor instead but oem sensor must remain for the ecu to operate correctly so just encorperate the oem into aftermarket speedo