Hi,


If anyone can help, I need:
A left side (below the seat) panel
A fan relay
A fully working dashboard.


Cheers.
Andy.

I do not believe you need to go to that expense to improve the Suspension of the 600
A set of progressive springs to cater for you weight and all riding options with 10w Synthetic oil will usually sort the front. A reasonably priced Hagon Shock at the rear with a progressive spring again to cater for your weight and all riding options will fix the rear.Switch to Sports tyres or the new type good Sports Touring tyres.

 

Thanks, yes absolutely will add photos. I'm just working through carbs at the moment and once I've got a decent gallery I'll share it.


I've hundreds of bandit photos  but I won't bore you will those!


Richard Tindall on the Facebook page if u want to give me a nudge on there too 😀

Hey Richard, so I have sticked your post as I beleive this is a service a lot of fellow foccers could make use of.

In the mean time can you add some before and after photos, to the OP, of jobs you have done previously. 

Hello Guys,

I am almost only riding road on weekends but I do like to push myself and I find the bike sometimes gives me an unstable feel, I would like to upgrade it, also I am in love with the bike and I will be keeping it and I only want to improve it, starting with suspension.

So I was checking all the threads about R6/R1 forks and started considering it, but then I came across the thread about upgrading the stock suspension so I am leaning towards the upgrade. My question is: between the following variants:

1. Race Tech Gold Valve Cartridge Fork Emulators or other fork valves like these: https://www.wemoto.com/bike/yamaha/fzs/600/2000/1615/fork-valves

and
 
2. Andreani Misano Evo Fork Cartridge Kit: https://www.brooksuspension.co.uk/fork-internals/yamaha-fzs-600-fazer-andreani-misano-evo-fork-cartridge-kit-98-03?switch=BG or this one: Fork upgrade kit Yamaha FZS 600 Matris FSE: https://www.officine08.com/p81259_fork-upgrade-kit-yamaha-fzs-600-matris-fse.html


Would the 1st variant be half assed or is it a proper upgrade in your opinion? Should I consider it, or just move onto the full upgrade?

Also, if variant 1 is a proper upgrade, should I consider the cheaper options like these fork valves: https://www.wemoto.com/bike/yamaha/fzs/600/2000/1615/fork-valves or rule them out and go with gold ones?

FInal question, I cannot find gold valves for the exact fzs600 2000y so I am wondering would I want 41mm ones or some other diameter?

I know the price is very different, and I would always want to spend less, but the more important thing is quality of the upgrade so for my bike I am willing to spend if the fork valves variant is not a proper option.

Thanks a lot in advance for your opinions.

Best Regards