Date: 23-05-24  Time: 00:28 am

Recent Posts

Pages: [1] 2 3 ... 10
1
Fazer 1000/FZ1 corner / Re: jerky ride fuel system ,road surface or snatchy gearing
« Last post by b1k3rdude on 22 May 2024, 05:26:24 pm »
The throttle on the FZS1000 is quite sensetive, and one the common issues that will make that issue wors is if the drive chain is too slack and/or the cush drive rubbers behind the rear sprocket carrier are worn.

Regarding your suspension, have to checked and set the static sag and then adjusted the damping to suit..?
2
Fazer 1000/FZ1 corner / Re: Ohlins YA-009 rear shock for fz1: fitment
« Last post by b1k3rdude on 22 May 2024, 05:23:31 pm »
Welp Harris in Hertford are shutting down, so I had to email PDQ instead, waiting for the email with the parts and prices.
3
FZS600 Fazer / Re: Engine Rattle
« Last post by darrsi on 22 May 2024, 07:21:53 am »
Quote from: Lemongrab on 21 May 2024, 06:34:53 pm
Quote from: darrsi on 21 May 2024, 06:09:39 am
Quote from: Lemongrab on 20 May 2024, 08:39:16 am
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.


I was gonna say check the sprocket, sprocket nut and chain, for wear. May even just be the rear wheel alignment out too?
But when you mention "stationary" do you mean completely still, or with the bike on the centre stand, bike in gear and the rear wheel moving?
Stationary as in bike not moving, bike in neutral.


If it does it in stationary mode then your best bet is to video the sound and let us hear it, for a quicker solution.
4
FZS600 Fazer / Re: Engine Rattle
« Last post by darrsi on 22 May 2024, 07:19:15 am »
Quote from: Lemongrab on 21 May 2024, 06:34:05 pm
Quote from: BBROWN1664 on 20 May 2024, 08:38:55 pm
Quote from: Lemongrab on 20 May 2024, 05:08:22 pm
Quote from: BBROWN1664 on 20 May 2024, 08:47:47 am
What is your idle speed set to?
Idle speed set to 1500rpm. Once the engine is hot it tends to idle at around 1800rpm


idle speed once warm shoulf be about 1250
What are the consequences of this to a carb'd engine? Running rich?


These particular bikes do run rich as standard anyway.
How long have you had the bike? (whatever it is, you need to put the year and model under your name to give us more info)
And do you know the history of the bike, in this example when was the air filter last changed? Changing to a K&N air filter can balance the fuel mixture a bit better by helping the engine breathe more.
5
FZS600 Fazer / Re: Engine Rattle
« Last post by Lemongrab on 21 May 2024, 06:34:53 pm »
Quote from: darrsi on 21 May 2024, 06:09:39 am
Quote from: Lemongrab on 20 May 2024, 08:39:16 am
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.


I was gonna say check the sprocket, sprocket nut and chain, for wear. May even just be the rear wheel alignment out too?
But when you mention "stationary" do you mean completely still, or with the bike on the centre stand, bike in gear and the rear wheel moving?
Stationary as in bike not moving, bike in neutral.
6
FZS600 Fazer / Re: Engine Rattle
« Last post by Lemongrab on 21 May 2024, 06:34:05 pm »
Quote from: BBROWN1664 on 20 May 2024, 08:38:55 pm
Quote from: Lemongrab on 20 May 2024, 05:08:22 pm
Quote from: BBROWN1664 on 20 May 2024, 08:47:47 am
What is your idle speed set to?
Idle speed set to 1500rpm. Once the engine is hot it tends to idle at around 1800rpm


idle speed once warm shoulf be about 1250
What are the consequences of this to a carb'd engine? Running rich?
7
FZS600 Fazer / Paint
« Last post by spider on 21 May 2024, 06:09:55 pm »
I bought some hammerite paint for the rusty bits to brush on bike plus the engine fins and the bit above gear lever that sez Yamaha hopefully it will tidy it up or would powder coating on that part be better for it . I got smooth black
8
FZS600 Fazer / Re: Tank ring
« Last post by spider on 21 May 2024, 05:38:24 pm »
I hope you’re okay mate as the conversation has gone dead
9
FZS600 Fazer / Re: Engine Rattle
« Last post by darrsi on 21 May 2024, 06:09:39 am »
Quote from: Lemongrab on 20 May 2024, 08:39:16 am
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.


I was gonna say check the sprocket, sprocket nut and chain, for wear. May even just be the rear wheel alignment out too?
But when you mention "stationary" do you mean completely still, or with the bike on the centre stand, bike in gear and the rear wheel moving?
10
FZS600 Fazer / Re: Engine Rattle
« Last post by BBROWN1664 on 20 May 2024, 08:38:55 pm »
Quote from: Lemongrab on 20 May 2024, 05:08:22 pm
Quote from: BBROWN1664 on 20 May 2024, 08:47:47 am
What is your idle speed set to?
Idle speed set to 1500rpm. Once the engine is hot it tends to idle at around 1800rpm


idle speed once warm shoulf be about 1250
Pages: [1] 2 3 ... 10