Date: 01-05-24  Time: 09:54 am

Author Topic: Anyone used cmsnl.com for parts?  (Read 4165 times)

breadlord

  • Weekend Warrior
  • ***
  • Posts: 107
    • Main bike:
      FZ6 04-06
    • View Profile
Anyone used cmsnl.com for parts?
« on: 20 August 2012, 07:35:36 pm »
Just put together my parts list so's I can get my dad to replace the exhaust manifold studs, gaskets and nuts on Bess, and the official Yamaha parts total comes to €62.00 on cmsnl.com (One of the few places that seem to sell by Yam parts number.)

4x Gaskets @ €4.50 each
8x Studs @ €2.50 each
8x Nuts @ €3.00 each (WTF?)

Seems a bit out of whack, frankly. Does anyone know of a website that will show you equivalent non-yamaha parts, because close to 90 EUR seems a bit stiff for maybe a hundred grams of metal... Or better yet, does anyone know anyone who sells the Yam parts cheaper?

steeeve66

  • Club Racer
  • ****
  • Posts: 466
    • Main bike:
      FZS 1000 Gen1
    • - KTM SD 990, CBR600FS, CB500
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #1 on: 20 August 2012, 08:21:00 pm »
I've used cmsnl in the past for parts I couldn't find elsewhere. Good service but, as you've discovered, not cheap. Have you tried Wemoto or Fowlers?

S
Someone sent me a postcard picture of the earth. On the back it said, "Wish you were here."

Steven Wright

breadlord

  • Weekend Warrior
  • ***
  • Posts: 107
    • Main bike:
      FZ6 04-06
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #2 on: 20 August 2012, 08:32:40 pm »
Wemoto doesn't return any parts when I give the OEM number (Which I used Yamaha's online parts catalogue to get).
Fowlers won't give you prices online, you've got to call them with the VIN, engine and parts numbers, apparently - seems a bit odd to me, but hey.

Fowlers is probably a no-goer, since my main mission is to get my Dad back into bikes. Iif I have him dicking around with part numbers and crawling on the floor for the block number he'll just get pissed off, whereas if I can just get a box of bits sent over he can spanner away happily.

John Silva

  • WSB Pack Hound
  • *****
  • Posts: 656
    • Main bike:
      FZS600 02-03
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #3 on: 20 August 2012, 10:03:03 pm »
Theres A.J. Sutton www.yamahamotorcyclespares.co.uk
Haven't tried them tho so cant say if there good or bad.
Biking is about the Journey NOT the Destination...

griff86

  • Club Racer
  • ****
  • Posts: 370
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #4 on: 21 August 2012, 07:32:34 am »
AJ Sutton is really good, used them loads of times.
 
No part numbers on their site though, if you do have the parts microfiche they use the same item numbers(1-20 for example) that the microfiche uses so I find the parts that way.

MadDogMcQ

  • Club Racer
  • ****
  • Posts: 478
  • Horwich, Bolton, NW UK.
    • Main bike:
      FZ1 Faired Gen2
    • - CB250N
    • View Profile
    • My Website
Re: Anyone used cmsnl.com for parts?
« Reply #5 on: 21 August 2012, 08:18:50 am »
I've used CMSNL on many occasions (very recently paying £90 for 2 floats for a 31yr old bike  :eek ). They're incredibly expensive, but they often have parts which are otherwise unavailable and their service is first class.
QUENTIN TARANTINO - HALLOWED BE THY NAME!

breadlord

  • Weekend Warrior
  • ***
  • Posts: 107
    • Main bike:
      FZ6 04-06
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #6 on: 21 August 2012, 03:48:17 pm »
In the end I've ordered from a dealer local to my dad, so he can just go and pick them up. Came to about £50, which is about the cheapest I could find online once you factor in delivery. Webb's of Lincoln if anyone's interested.

A.J. Sutton is brilliant, bookmarked for future reference. Identifying the parts by the diagrams is how I got the parts numbers in the first place so it wasn't too painful...

Thanks all!

His Dudeness

  • GP Hero
  • ******
  • Posts: 2,801
    • Main bike:
      I don't own a bike
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #7 on: 21 August 2012, 11:28:36 pm »
just for future reference wemoto does give you prices if you go down to the enter oem part number search bar

studs 2.04
gasket 2.90
nut 1.37

breadlord

  • Weekend Warrior
  • ***
  • Posts: 107
    • Main bike:
      FZ6 04-06
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #8 on: 22 August 2012, 07:17:53 pm »
I did do, but the part numbers I had didn't return anything. Going to the actual page for the bike didn't show the parts up in the list, either.

His Dudeness

  • GP Hero
  • ******
  • Posts: 2,801
    • Main bike:
      I don't own a bike
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #9 on: 23 August 2012, 12:36:09 am »

dolau

  • GP Hero
  • ******
  • Posts: 1,975
    • Main bike:
      FZ6 S2 07-09
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #10 on: 24 August 2012, 12:56:07 pm »
Nearly £500 for my new ECU!  :eek :rolleyes
59 going on 57

fireblake

  • GP Hero
  • ******
  • Posts: 1,490
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #11 on: 25 August 2012, 10:07:40 pm »
I used Csmnl.com for some parts for my sons Suzi Katana scooter (Travesty using that name on a ped) and they were half the price of Crescent Suzuki delivered. I never tried any other online shops though.
Sent from my villa in the South of France.


solorider

  • WSB Pack Hound
  • *****
  • Posts: 717
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #12 on: 26 August 2012, 11:26:16 pm »
for studs when i changed mine i went to a vauxhall dealer,the studs were over half the price and was a stock item,for the nuts i bought domed stainless steel nuts off ebay,hopefully i wont have anymore issues getting my nuts off lol

solorider

  • WSB Pack Hound
  • *****
  • Posts: 717
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #13 on: 26 August 2012, 11:28:18 pm »
just found the part number,it is Part number 90106239 and is an near identical size

Farjo

  • Consultor de administración
  • GP Hero
  • ******
  • Posts: 14,645
  • Admin alumni
    • Main bike:
      FZS600 02-03
    • View Profile
Re: Anyone used cmsnl.com for parts?
« Reply #14 on: 01 September 2012, 08:53:51 pm »
 :eek :eek Bloody Hell!! :eek :eek

Wanted some bits, Wemoto said 8-10 days, ordered off of A.J. Sutton www.yamahamotorcyclespares.co.uk yesterday afternoon, arrived in today's post!!